Re: [PATCH v3 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On 14/05/14 02:03, Thomas Abraham wrote:
From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>

Add a new optional boost-frequency binding for specifying the frequencies
usable in boost mode.

Cc: Nishanth Menon <nm@xxxxxx>
Cc: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
---
  .../devicetree/bindings/cpufreq/cpufreq-boost.txt  |   11 +++++++++++
  1 files changed, 11 insertions(+), 0 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
new file mode 100644
index 0000000..d925e38
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
@@ -0,0 +1,11 @@
+* Device tree binding for CPU boost frequency (aka over-clocking)
+
+Certain CPU's can be operated in optional 'boost' mode (or sometimes referred as
+overclocking) in which the CPU can operate in frequencies beyond the normal
+operating conditions.
+
+Optional Properties:
+- boost-frequency: list of frequencies in KHz to be used only in boost mode.
+  This list should be a subset of frequencies listed in "operating-points"
+  property. Refer to Documentation/devicetree/bindings/power/opp.txt for
+  details about "operating-points" property.


Though I understand the need of it, I think the binding is designed to suffice
the need of the boost frequency support in cpufreq.

Typically SoC would provide characteristics like under-drive(hits performance
but most energy efficient), nominal(highest sustained performance w/o any
external constraint like power, thermal) and over-drive(maximum performance but
not sustainable for long periods)

IMO the binding could represent these unique points on the curve instead.

Regards,
Sudeep

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux