From: Yuantian Tang <andy.tang@xxxxxxx> Cooling-maps doesn't have to be a required property because there may be no cooling device on system, or there are no enough cooling devices for each thermal zone in multiple thermal zone cases since cooling devices can't be shared. So make this property optional to remove such limitations. For thermal zones with no cooling-maps, there could be critic trips that can trigger CPU reset or shutdown. So they still can take actions. Signed-off-by: Yuantian Tang <andy.tang@xxxxxxx> --- Documentation/devicetree/bindings/thermal/thermal.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index ca14ba959e0d..f78bec19ca35 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -142,11 +142,11 @@ Required properties: - trips: A sub-node which is a container of only trip point nodes Type: sub-node required to describe the thermal zone. +Optional property: - cooling-maps: A sub-node which is a container of only cooling device Type: sub-node map nodes, used to describe the relation between trips and cooling devices. -Optional property: - coefficients: An array of integers (one signed cell) containing Type: array coefficients to compose a linear relation between Elem size: one cell the sensors listed in the thermal-sensors property. -- 2.17.1
