Hi Nikolaus,
Le ven., mars 6, 2020 at 22:06, H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx> a écrit :
From: Alex Smith <alex.smith@xxxxxxxxxx>
The infrared sensor on the CI20 board is connected to a GPIO and can
be operated by using the gpio-ir-recv driver. Add a DT node for the
sensor to allow that driver to be used.
Signed-off-by: Alex Smith <alex.smith@xxxxxxxxxx>
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Cheers,
-Paul
---
arch/mips/boot/dts/ingenic/ci20.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts
b/arch/mips/boot/dts/ingenic/ci20.dts
index c340f947baa0..fc4e64200c3d 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -62,6 +62,11 @@
enable-active-high;
};
+ ir: ir {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+ };
+
wlan0_power: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "wlan0_power";
--
2.23.0
