With the introduction of SDHCI_QUIRK2_SET_BUS_VOLTAGE there is no need
to use a custom set_power() implementation as the quirk takes care of
configuring the bus voltage register even when powering trough a
regulator.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
---
drivers/mmc/host/sdhci-pxav3.c | 20 +-------------------
1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e55037ceda73..dc4a1e69e6f6 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -297,27 +297,8 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
__func__, uhs, ctrl_2);
}
-static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
-{
- struct mmc_host *mmc = host->mmc;
- u8 pwr = host->pwr;
-
- sdhci_set_power_noreg(host, mode, vdd);
-
- if (host->pwr == pwr)
- return;
-
- if (host->pwr == 0)
- vdd = 0;
-
- if (!IS_ERR(mmc->supply.vmmc))
- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
-}
-
static const struct sdhci_ops pxav3_sdhci_ops = {
.set_clock = sdhci_set_clock,
- .set_power = pxav3_set_power,
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.set_bus_width = sdhci_set_bus_width,
@@ -330,6 +311,7 @@ static const struct sdhci_pltfm_data sdhci_pxav3_pdata = {
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
| SDHCI_QUIRK_32BIT_ADMA_SIZE
| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_SET_BUS_VOLTAGE,
.ops = &pxav3_sdhci_ops,
};
--
2.25.1
