[PATCH 03/10] mmc: sdhci: arsan: Use quirk instead of custom set_power()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With the introduction of SDHCI_QUIRK2_SET_BUS_VOLTAGE there is no need
to use a custom set_power() implementation as the quirk takes care of
configuring the bus voltage register even when powering trough a
regulator.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
---
 drivers/mmc/host/sdhci-of-arasan.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 0146d7dd315b..928953bbdc10 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -325,17 +325,6 @@ static int sdhci_arasan_voltage_switch(struct mmc_host *mmc,
 	return -EINVAL;
 }
 
-static void sdhci_arasan_set_power(struct sdhci_host *host, unsigned char mode,
-		     unsigned short vdd)
-{
-	if (!IS_ERR(host->mmc->supply.vmmc)) {
-		struct mmc_host *mmc = host->mmc;
-
-		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
-	}
-	sdhci_set_power_noreg(host, mode, vdd);
-}
-
 static const struct sdhci_ops sdhci_arasan_ops = {
 	.set_clock = sdhci_arasan_set_clock,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
@@ -343,7 +332,6 @@ static const struct sdhci_ops sdhci_arasan_ops = {
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_arasan_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
-	.set_power = sdhci_arasan_set_power,
 };
 
 static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
@@ -351,7 +339,8 @@ static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
 	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
 			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
-			SDHCI_QUIRK2_STOP_WITH_TC,
+			SDHCI_QUIRK2_STOP_WITH_TC |
+			SDHCI_QUIRK2_SET_BUS_VOLTAGE,
 };
 
 static struct sdhci_arasan_of_data sdhci_arasan_data = {
@@ -362,7 +351,8 @@ static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = {
 	.ops = &sdhci_arasan_ops,
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
 			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
-			SDHCI_QUIRK2_STOP_WITH_TC,
+			SDHCI_QUIRK2_STOP_WITH_TC |
+			SDHCI_QUIRK2_SET_BUS_VOLTAGE,
 };
 
 static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = {
@@ -414,7 +404,6 @@ static const struct sdhci_ops sdhci_arasan_cqe_ops = {
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_arasan_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
-	.set_power = sdhci_arasan_set_power,
 	.irq = sdhci_arasan_cqhci_irq,
 };
 
@@ -422,7 +411,8 @@ static const struct sdhci_pltfm_data sdhci_arasan_cqe_pdata = {
 	.ops = &sdhci_arasan_cqe_ops,
 	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
+		   SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+		   SDHCI_QUIRK2_SET_BUS_VOLTAGE,
 };
 
 static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux