[PATCH v2] ARM: dts: iwg22d-sodimm: Enable touchscreen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In one of the iWave-G22D development board variants, called Generic SODIMM
Development Platform, we have an LCD with touchscreen. The resistive touch
controller, STMPE811 is on the development board and is connected through
the i2c5 of the RZ-G1E.

Additionally, this controller should generate an interrupt to the CPU and
it is connected through GPIO4,4 to the GIC.

Touch was tested with one of our iW-RainboW-G22D-SODIMM RZ/G1E development
platforms.

More details on the iWave website:
https://www.iwavesystems.com/rz-g1e-sodimm-development-kit.html

Changes from v1:
 -remove redundant GPIO code
 -remove obsolete and unused properties
 -sync property values with the comments & the bindings

Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 33 +++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 872f8a6..ab38b39 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -172,6 +172,39 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+	};
+
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux