On 06/02/20 11:40 am, Yuti Amonkar wrote: > This patch series applies to the Cadence SD0801 PHY driver. > Cadence SD0801 PHY is also known as Torrent PHY. Torrent PHY > is a multiprotocol PHY supporting PHY configurations including > Display Port, USB and PCIe. > > This patch series converts SD0801 PHY driver for DisplayPort into a > generic Torrent PHY driver, updates DisplayPort functionality with > reconfiguration support and finally adds platform dependent initialization > for TI J7 SoCs. merged now, Thanks! -Kishon > > The patch series has following patches which applies the changes > in the below sequence > 1. 001-dt-bindings-phy-Remove-Cadence-MHDP-PHY-dt-binding > This patch removes the MHDP PHY binding. > 2. 002-dt-bindings-phy-Add-Cadence-MHDP-PHY-bindings-in-YAML-format. > This patch converts the MHDP PHY device tree bindings to yaml schemas > 3. 003-phy-cadence-dp-Rename-to-phy-Cadence-Torrent > Rename Cadence DP PHY driver from phy-cadence-dp to phy-cadence-torrent > 4. 004-phy-cadence-torrent-Adopt-Torrent-nomenclature > Update private data structures, module descriptions and functions prefix to Torrent > 5. 005-phy-cadence-torrent-Add-wrapper-for-PHY-register-access > Add a wrapper function to write Torrent PHY registers to improve code readability. > 6. 006-phy-cadence-torrent-Add-wrapper-for-DPTX-register-access > Add wrapper functions to read, write DisplayPort specific PHY registers to improve code > readability. > 7. 007-phy-cadence-torrent-Refactor-code-for-reusability > Add separate function to set different power state values. > Use of uniform polling timeout value. Check return values of functions for error handling. > 8. 008-phy-cadence-torrent-Add-19.2-MHz-reference-clock-support > Add configuration functions for 19.2 MHz reference clock support. Add register configurations > for SSC support. > 9. 009-phy-cadence-torrent-Implement-phy-configure-APIs > Add PHY configuration APIs for link rate, number of lanes, voltage swing and pre-emphasis values. > 10. 010-phy-cadence-torrent-Use-regmap-to-read-and-write-Torrent-PHY-registers > Use regmap for accessing Torrent PHY registers. Update register offsets. Abstract address > calculation using regmap APIs. > 11. 011-phy: cadence-torrent-Use-regmap-to-read-and-write-DPTX-PHY-registers > Use regmap to read and write DPTX specific PHY registers. > 12. 012-phy-cadence-torrent-Add-platform-dependent-initialization-structure > Add platform dependent initialization data for Torrent PHY used in TI's J721E SoC. > 13. 013-phy: cadence-torrent-Add-support-for-subnode-bindings > Implement single link subnode support to the phy driver. > > Version History: > > v4: > - Add separate patch to remove old binding. > - Add new patch to add new binding in YAML format. > - Squashed "dt-bindings: phy: phy-cadence-torrent: Add platform dependent > compatible string" with "dt-bindings: phy: Add Cadence MHDP PHY bindings > in YAML format". > - Added SPDX dual license tag to YAML bindings. > - Updated resets property description and removed reset-names > property. > - Added enum to cdns,phy-type property adding all the currently > known phy-type values. > - Updated the child node resets property to support one reset > per lane. > - Added default values for cdns,num-lanes and cdns,max-bit-rate properties. > > > v3: > - Removed "Add clock binding" patch from the series and merged it with > "Convert-Cadence-MHDP-PHY-bindings-to-YAML" patch. > - Added reset and reset-names properties to YAML file. > - Updated dptx_phy reg entry as optional in YAML. > - Renamed reg-names from sd0801_phy to torrent_phy. > - Added subnode property for each group of PHY lanes based on PHY > type to the YAML. Renamed num_lanes and max_bit_rate to cdns,num-lanes > and cdns,max-bit-rate and moved it to subnode properties. > - Added cdns,phy-type property in subnode. Currently cdns,phy-type supports only > PHY_TYPE_DP. > - Added subnode instance structure to the driver in reference to the dts change. > - Updated functions to read properties from child node instead of parent node. > - Added num_lanes as argument to the cdns_torrent_dp_run function. > > v2: > - Remove patch [1] from this series and send for a separate review. > - Use enum in compatible property of YAML file. > - Remove quotes in clock-names property "refclk" -> refclk in YAML file. > - Add reg-names property to YAML file > - Add additionalProperties:false to YAML file. > - No change in the driver code. > > This patch series is dependent on PHY DisplayPort configuration patch [1]. > > [1] > > https://lkml.org/lkml/2020/1/6/279 > > Swapnil Jakhade (10): > phy: cadence-torrent: Adopt Torrent nomenclature > phy: cadence-torrent: Add wrapper for PHY register access > phy: cadence-torrent: Add wrapper for DPTX register access > phy: cadence-torrent: Refactor code for reusability > phy: cadence-torrent: Add 19.2 MHz reference clock support > phy: cadence-torrent: Implement PHY configure APIs > phy: cadence-torrent: Use regmap to read and write Torrent PHY > registers > phy: cadence-torrent: Use regmap to read and write DPTX PHY registers > phy: cadence-torrent: Add platform dependent initialization structure > phy: cadence-torrent: Add support for subnode bindings > > Yuti Amonkar (3): > dt-bindings: phy: Remove Cadence MHDP PHY dt binding > dt-bindings: phy: Add Cadence MHDP PHY bindings in YAML format. > phy: cadence-dp: Rename to phy-cadence-torrent > > .../bindings/phy/phy-cadence-dp.txt | 30 - > .../bindings/phy/phy-cadence-torrent.yaml | 143 ++ > drivers/phy/cadence/Kconfig | 6 +- > drivers/phy/cadence/Makefile | 2 +- > drivers/phy/cadence/phy-cadence-dp.c | 541 ----- > drivers/phy/cadence/phy-cadence-torrent.c | 1944 +++++++++++++++++ > 6 files changed, 2091 insertions(+), 575 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-dp.txt > create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml > delete mode 100644 drivers/phy/cadence/phy-cadence-dp.c > create mode 100644 drivers/phy/cadence/phy-cadence-torrent.c >
