Hi Nicolas,
Am 03.03.20 um 18:32 schrieb Nicolas Saenz Julienne:
> The register based driver turned out to be unstable, specially on RPi3a+
> but not limited to it. While a fix is being worked on, we roll back to
> using firmware based scheme.
>
> Fixes: e1dc2b2e1bef ("ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware")
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> ---
>
> See https://github.com/raspberrypi/linux/issues/3046 for more reference.
> Note: I tested this on RPi3b, RPi3a+ and RPi2b.
as i already wrote this prevent X to start on current Raspbian on my
Raspberry Pi 3A+ (multi_v7_defconfig, no u-boot). We must be careful here.
I will take a look at the debug UART. Maybe there are more helpful
information.
Regards
Stefan
>
> arch/arm/boot/dts/bcm2835-common.dtsi | 1 -
> arch/arm/boot/dts/bcm2835-rpi-common.dtsi | 12 ++++++++++++
> arch/arm/boot/dts/bcm2835.dtsi | 1 +
> arch/arm/boot/dts/bcm2836.dtsi | 1 +
> arch/arm/boot/dts/bcm2837.dtsi | 1 +
> 5 files changed, 15 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/bcm2835-rpi-common.dtsi
>
> diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
> index 2b1d9d4c0cde..4119271c979d 100644
> --- a/arch/arm/boot/dts/bcm2835-common.dtsi
> +++ b/arch/arm/boot/dts/bcm2835-common.dtsi
> @@ -130,7 +130,6 @@ v3d: v3d@7ec00000 {
> compatible = "brcm,bcm2835-v3d";
> reg = <0x7ec00000 0x1000>;
> interrupts = <1 10>;
> - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> };
>
> vc4: gpu {
> diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
> new file mode 100644
> index 000000000000..b78a57534611
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * This include file covers the common peripherals and configuration between
> + * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
> + * firmware interface.
> + */
> +
> +#include <dt-bindings/power/raspberrypi-power.h>
> +
> +&v3d {
> + power-domains = <&power RPI_POWER_DOMAIN_V3D>;
> +};
> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
> index 53bf4579cc22..0549686134ea 100644
> --- a/arch/arm/boot/dts/bcm2835.dtsi
> +++ b/arch/arm/boot/dts/bcm2835.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> #include "bcm283x.dtsi"
> #include "bcm2835-common.dtsi"
> +#include "bcm2835-rpi-common.dtsi"
>
> / {
> compatible = "brcm,bcm2835";
> diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
> index 82d6c4662ae4..b390006aef79 100644
> --- a/arch/arm/boot/dts/bcm2836.dtsi
> +++ b/arch/arm/boot/dts/bcm2836.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> #include "bcm283x.dtsi"
> #include "bcm2835-common.dtsi"
> +#include "bcm2835-rpi-common.dtsi"
>
> / {
> compatible = "brcm,bcm2836";
> diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
> index 9e95fee78e19..0199ec98cd61 100644
> --- a/arch/arm/boot/dts/bcm2837.dtsi
> +++ b/arch/arm/boot/dts/bcm2837.dtsi
> @@ -1,5 +1,6 @@
> #include "bcm283x.dtsi"
> #include "bcm2835-common.dtsi"
> +#include "bcm2835-rpi-common.dtsi"
>
> / {
> compatible = "brcm,bcm2837";
