Re: [PATCH] drivers/of/of_mdio.c:fix of_mdiobus_register()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>On Mon, Mar 02, 2020 at 12:41:38AM +0800, Dajun Jin wrote:
>> when registers a phy_device successful, should terminate the loop
>> or the phy_device would be registered in other addr.
>> 
>> Signed-off-by: Dajun Jin <adajunjin@xxxxxxxxx>
>> ---
>>  drivers/of/of_mdio.c | 1 +
>>  1 file changed, 1 insertion(+)
>> 
>> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
>> index 8270bbf505fb..9f982c0627a0 100644
>> --- a/drivers/of/of_mdio.c
>> +++ b/drivers/of/of_mdio.c
>> @@ -306,6 +306,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
>>  				rc = of_mdiobus_register_phy(mdio, child, addr);
>>  				if (rc && rc != -ENODEV)
>>  					goto unregister;
>> +				break;
>>  			}
>>  		}
>>  	}
>
>Hi Dajun
>
>What problem are you seeing? You explanation needs to be better.
>
>I'm guessing you have two or more PHYs on the bus, without reg
>properties?
>
>	Andrew

Hi Andrew

If a phy without reg property would be registered to all unoccupied addr.

This is my test in Xilinx zcu106 board.

dts is liks this:
ethernet@ff0e0000 {
    compatible = "cdns,zynqmp-gem", "cdns,gem";
    status = "okay";
    ...
    
    phy@0 {
        ti,rx-internal-delay = <0x8>;
        ti,tx-internal-delay = <0xa>;
        ti,fifo-depth = <0x1>;
        ti,rxctrl-strap-worka;
        linux,phandle = <0x12>;
        phandle = <0x12>;
    };
};

then when borad is booting,the dmesg is like this:
[    4.600035] mdio_bus ff0e0000.ethernet-ffffffff: /amba/ethernet@ff0e0000/phy@0 has invalid PHY address
[    4.600050] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 0
[    4.602076] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 1
[    4.603849] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 2
[    4.605574] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 4
[    4.607312] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 5
...
[    4.636155] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 28
[    4.637335] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 29
[    4.638504] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 30
[    4.639666] mdio_bus ff0e0000.ethernet-ffffffff: scan phy phy at address 31

	Dajun



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux