The BG2Q has an AHCI SATA controller. Add the corresponding nodes
(AHCI, SATA PHYs) in its device tree.
Signed-off-by: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/berlin2q.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 07452a7483fa..53f8d9763589 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -183,6 +183,31 @@
};
};
+ ahci: sata@e90000 {
+ compatible = "marvell,berlin-ahci";
+ reg = <0xe90000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sata_phy: phy@e900a0 {
+ compatible = "marvell,berlin-sata-phy";
+ reg = <0xe900a0 0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ sata_phy1: phy@1 {
+ #phy-cells = <0>;
+ reg = <1>;
+ };
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
