Hi CK,
Thanks for your comment.
On Fri, 2020-02-28 at 22:59 +0800, CK Hu wrote:
> Hi, Dennis:
>
> On Fri, 2020-02-28 at 21:44 +0800, Dennis YC Hsieh wrote:
> > Add jump function so that client can jump to any address which
> > contains instruction.
> >
> > Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
> > ---
> > drivers/soc/mediatek/mtk-cmdq-helper.c | 12 ++++++++++++
> > include/linux/soc/mediatek/mtk-cmdq.h | 11 +++++++++++
> > 2 files changed, 23 insertions(+)
> >
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index 58fec634dcf1..bbc68a7c81e9 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -372,6 +372,18 @@ int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
> > }
> > EXPORT_SYMBOL(cmdq_pkt_assign);
> >
> > +int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr)
> > +{
> > + struct cmdq_client *cl = pkt->cl;
> > + struct cmdq_instruction inst = { {0} };
> > +
> > + inst.op = CMDQ_CODE_JUMP;
> > + inst.offset = 1;
>
> Symbolize the value '1'.
>
> > + inst.value = addr >> cmdq_mbox_shift(cl->chan);
>
> If you write as 'cmdq_mbox_shift(pkt->cl->chan)', you could drop local
> variable 'cl'.
Ok, will do.
Regards,
Dennis
>
> Regards,
> CK
>
> > + return cmdq_pkt_append_command(pkt, inst);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_jump);
> > +
> > int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> > {
> > struct cmdq_instruction inst = { {0} };
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > index 99e77155f967..1a6c56f3bec1 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -213,6 +213,17 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
> > */
> > int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
> >
> > +/**
> > + * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE
> > + * to execute an instruction that change current thread PC to
> > + * a physical address which should contains more instruction.
> > + * @pkt: the CMDQ packet
> > + * @addr: physical address of target instruction buffer
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr);
> > +
> > /**
> > * cmdq_pkt_finalize() - Append EOC and jump command to pkt.
> > * @pkt: the CMDQ packet
>
>
