Currently multiple interrupts for some devices are written as one array
instead of using the DT grouping notation (<0 42 4>, <0 23 4>).
This ends up in the same binary representation in the .dtb, but is
semantically not equivalent. The yaml schema checks will stumble over
this, so lets fix that first.
I refrained from using the symbolic names for GIC_SPI/GIC_PPI and
IRQ_TYPE_LEVEL_HIGH, mostly because it increases the delta between the
original DTS files and the mainline versions, so it's just additional
churn.
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
arch/arm/boot/dts/ecx-2000.dts | 2 +-
arch/arm/boot/dts/ecx-common.dtsi | 4 ++--
arch/arm/boot/dts/highbank.dts | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 8e0489607704..f6eb71553b95 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -93,7 +93,7 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
+ interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
};
};
};
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index f819e3328a9e..b7e74a357471 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -202,14 +202,14 @@
ethernet@fff50000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff50000 0x1000>;
- interrupts = <0 77 4 0 78 4 0 79 4>;
+ interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
dma-coherent;
};
ethernet@fff51000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff51000 0x1000>;
- interrupts = <0 80 4 0 81 4 0 82 4>;
+ interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
dma-coherent;
};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 9e34d1bd7994..b6b0225a769e 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -142,14 +142,14 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
+ interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
};
sregs@fff3c200 {
compatible = "calxeda,hb-sregs-l2-ecc";
reg = <0xfff3c200 0x100>;
- interrupts = <0 71 4 0 72 4>;
+ interrupts = <0 71 4>, <0 72 4>;
};
};
--
2.17.1
