A test with the command below gives these errors: arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000: 'g-use-dma', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-rock64.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' 'g-use-dma' is not a valid option in dwc2.yaml, so remove it from all Rockchip dtsi files. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx> --- arch/arm64/boot/dts/rockchip/px30.dtsi | 1 - arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 75908c587..4f484119f 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -870,7 +870,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; power-domains = <&power PX30_PD_USB>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 1f53ead52..bad41bc6f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -957,7 +957,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; -- 2.11.0
