Generally i2c addr should not be greater than 10-bit. The highest 2 bits
are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS. Need to mask
these flags if check slave addr valid.
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
---
scripts/dtc/Makefile | 2 +-
scripts/dtc/checks.c | 5 +++++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 3acbb410904c..c5e8d6a9e73c 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -9,7 +9,7 @@ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
# Source files need to get at the userspace version of libfdt_env.h to compile
-HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
+HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt -I$(srctree)/tools/include
ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
ifneq ($(CHECK_DTBS),)
diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
index 756f0fa9203f..17c9ed4137b5 100644
--- a/scripts/dtc/checks.c
+++ b/scripts/dtc/checks.c
@@ -3,6 +3,7 @@
* (C) Copyright David Gibson <dwg@xxxxxxxxxxx>, IBM Corporation. 2007.
*/
+#include <linux/bits.h>
#include "dtc.h"
#include "srcpos.h"
@@ -17,6 +18,9 @@
#define TRACE(c, fmt, ...) do { } while (0)
#endif
+#define I2C_TEN_BIT_ADDRESS BIT(31)
+#define I2C_OWN_SLAVE_ADDRESS BIT(30)
+
enum checkstatus {
UNCHECKED = 0,
PREREQ,
@@ -1048,6 +1052,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
for (len = prop->val.len; len > 0; len -= 4) {
reg = fdt32_to_cpu(*(cells++));
+ reg &= ~(I2C_OWN_SLAVE_ADDRESS | I2C_TEN_BIT_ADDRESS);
if (reg > 0x3ff)
FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"",
reg);
--
2.17.1
