Convert the Calxeda XGMAC Ethernet device binding to DT schema format
using json-schema.
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
.../devicetree/bindings/net/calxeda-xgmac.txt | 18 -------
.../bindings/net/calxeda-xgmac.yaml | 49 +++++++++++++++++++
2 files changed, 49 insertions(+), 18 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.txt
create mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
deleted file mode 100644
index c8ae996bd8f2..000000000000
--- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Calxeda Highbank 10Gb XGMAC Ethernet
-
-Required properties:
-- compatible : Should be "calxeda,hb-xgmac"
-- reg : Address and length of the register set for the device
-- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt.
- The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt.
-
-Optional properties:
-- dma-coherent : Present if dma operations are coherent
-
-Example:
-
-ethernet@fff50000 {
- compatible = "calxeda,hb-xgmac";
- reg = <0xfff50000 0x1000>;
- interrupts = <0 77 4 0 78 4 0 79 4>;
-};
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
new file mode 100644
index 000000000000..a8c1f00cff0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank 10Gb XGMAC Ethernet controller
+
+description: |
+ The Calxeda XGMAC Ethernet controllers are directly connected to the
+ internal machine "network fabric", which is set up, initialised and
+ managed by the firmware. So there are no PHY properties in this
+ binding. Switches in the fabric take care of routing and mapping the
+ traffic to external network ports.
+
+maintainers:
+ - Andre Przywara <andre.przywara@xxxxxxx>
+
+properties:
+ compatible:
+ const: calxeda,hb-xgmac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ Can point to at most 3 xgmac interrupts. The 1st one is the main
+ interrupt, the 2nd one is used for power management. The optional
+ 3rd one is the low power state interrupt.
+ minItems: 2
+ maxItems: 3
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ ethernet@fff50000 {
+ compatible = "calxeda,hb-xgmac";
+ reg = <0xfff50000 0x1000>;
+ interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
+ };
--
2.17.1
