We have these bits partially defined in two different places, so let's fix them up and add defines for the missing bits. These bits are the same for P1_SW_EVENTS, P2_SW_EVENTS and P3_SW_EVENTS. Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- drivers/mfd/twl4030-power.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 1b30d8a..c0e4fc3 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -35,7 +35,14 @@ static u8 twl4030_start_script_address = 0x2b; #define PWR_P1_SW_EVENTS 0x10 +#define PWR_STOPON_PRWON (1 << 6) +#define PWR_STOPON_SYSEN (1 << 5) +#define PWR_ENABLE_WARMRESET (1 << 4) +#define PWR_LVL_WAKEUP (1 << 3) +#define PWR_DEVACT (1 << 2) +#define PWR_DEVSLP (1 << 1) #define PWR_DEVOFF (1 << 0) + #define SEQ_OFFSYNC (1 << 0) #define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) @@ -52,10 +59,6 @@ static u8 twl4030_start_script_address = 0x2b; #define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37) #define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38) -#define LVL_WAKEUP 0x08 - -#define ENABLE_WARMRESET (1<<4) - #define END_OF_SCRIPT 0x3f #define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55) @@ -196,7 +199,7 @@ static int twl4030_config_wakeup3_sequence(u8 address) err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &data, R_P3_SW_EVENTS); if (err) goto out; - data |= LVL_WAKEUP; + data |= PWR_LVL_WAKEUP; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P3_SW_EVENTS); out: if (err) @@ -219,7 +222,7 @@ static int twl4030_config_wakeup12_sequence(u8 address) if (err) goto out; - data |= LVL_WAKEUP; + data |= PWR_LVL_WAKEUP; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P1_SW_EVENTS); if (err) goto out; @@ -228,7 +231,7 @@ static int twl4030_config_wakeup12_sequence(u8 address) if (err) goto out; - data |= LVL_WAKEUP; + data |= PWR_LVL_WAKEUP; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P2_SW_EVENTS); if (err) goto out; @@ -281,7 +284,7 @@ static int twl4030_config_warmreset_sequence(u8 address) if (err) goto out; - rd_data |= ENABLE_WARMRESET; + rd_data |= PWR_ENABLE_WARMRESET; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P1_SW_EVENTS); if (err) goto out; @@ -290,7 +293,7 @@ static int twl4030_config_warmreset_sequence(u8 address) if (err) goto out; - rd_data |= ENABLE_WARMRESET; + rd_data |= PWR_ENABLE_WARMRESET; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P2_SW_EVENTS); if (err) goto out; @@ -299,7 +302,7 @@ static int twl4030_config_warmreset_sequence(u8 address) if (err) goto out; - rd_data |= ENABLE_WARMRESET; + rd_data |= PWR_ENABLE_WARMRESET; err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P3_SW_EVENTS); out: if (err) -- 1.8.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
