Hi Alexander,
Just a few probe error handling suggestions...
On 13/05/14 19:39, Alexander Bersenev wrote:
> +static int sunxi_ir_probe(struct platform_device *pdev)
> +{
> + int ret = 0;
> + unsigned long tmp = 0;
> +
> + struct device *dev = &pdev->dev;
> + struct device_node *dn = dev->of_node;
> + struct resource *res;
> + struct sunxi_ir *ir;
> +
> + ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
> + if (!ir)
> + return -ENOMEM;
> +
> + /* Clock */
> + ir->apb_clk = devm_clk_get(dev, "apb");
> + if (IS_ERR(ir->apb_clk)) {
> + dev_err(dev, "failed to get a apb clock.\n");
> + return -EINVAL;
Does it make sense to return PTR_ERR(ir->apb_clk) here?
> + }
> + ir->clk = devm_clk_get(dev, "ir");
> + if (IS_ERR(ir->clk)) {
> + dev_err(dev, "failed to get a ir clock.\n");
> + return -EINVAL;
and here
> + }
> +
> + ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
> + if (ret) {
> + dev_err(dev, "set ir base clock failed!\n");
> + return -EINVAL;
return ret?
> + }
> +
> + if (clk_prepare_enable(ir->apb_clk)) {
> + dev_err(dev, "try to enable apb_ir_clk failed\n");
> + return -EINVAL;
> + }
> +
> + if (clk_prepare_enable(ir->clk)) {
> + dev_err(dev, "try to enable ir_clk failed\n");
> + ret = -EINVAL;
> + goto exit_clkdisable_apb_clk;
> + }
> +
> + /* IO */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + ir->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(ir->base)) {
> + dev_err(dev, "failed to map registers\n");
> + ret = -ENOMEM;
PTR_ERR again?
> + goto exit_clkdisable_clk;
> + }
> +
> + /* IRQ */
> + ir->irq = platform_get_irq(pdev, 0);
> + if (ir->irq < 0) {
> + dev_err(dev, "no irq resource\n");
> + ret = -EINVAL;
ret = ir->irq?
> + goto exit_clkdisable_clk;
> + }
> +
> + ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
> + if (ret) {
> + dev_err(dev, "failed request irq\n");
> + ret = -EINVAL;
necessary?
> + goto exit_clkdisable_clk;
> + }
> +
> + ir->rc = rc_allocate_device();
> +
> + if (!ir->rc) {
> + dev_err(dev, "failed to allocate device\n");
> + ret = -ENOMEM;
> + goto exit_clkdisable_clk;
> + }
> +
> + ir->rc->priv = ir;
> + ir->rc->input_name = SUNXI_IR_DEV;
> + ir->rc->input_phys = "sunxi-ir/input0";
> + ir->rc->input_id.bustype = BUS_HOST;
> + ir->rc->input_id.vendor = 0x0001;
> + ir->rc->input_id.product = 0x0001;
> + ir->rc->input_id.version = 0x0100;
> + ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
> + ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
> + ir->rc->dev.parent = dev;
> + ir->rc->driver_type = RC_DRIVER_IR_RAW;
> + rc_set_allowed_protocols(ir->rc, RC_BIT_ALL);
> + ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
> + ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
> + ir->rc->driver_name = SUNXI_IR_DEV;
> +
> + ret = rc_register_device(ir->rc);
> + if (ret) {
> + dev_err(dev, "failed to register rc device\n");
> + ret = -EINVAL;
same again
> + goto exit_free_dev;
> + }
> +
Cheers
James
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
