On Wed, 26 Feb 2020, H. Nikolaus Schaller wrote: > Hi, > > > Am 20.12.2019 um 13:24 schrieb Andreas Kemnade <andreas@xxxxxxxxxxxx>: > > > > In the variant RC5T619 the mfd has an RTC. This patchset adds > > support for it. To do so it adds the missing register defines in > > rn5t618.h and general irq handling for that. > > It seems that the irq definitions are the same except missing RTC > > but due to missing ability to test that I do not add them here. > > > > The rtc driver itself is based on > > https://github.com/kobolabs/Kobo-Reader/blob/master/hw/imx6sll-clara/kernel.tar.bz2 > > but heavily reworked. > > > > It was tested on the Kobo Clara HD. > > > > For cleaning up there is a separate off-topic patch: > > mfd: rn5t618: cleanup i2c_device_id > > > > Changes in v5: > > - static rn5t618_irq_init > > - PLATFORM_DEVID_NONE > > - added some Acked-Bys > > > > Changes in v4: > > - use macros for IRQ definitions > > - merge rn5t618-core.c and rn5t618-irq.c > > > > Changes in v3: > > - alignment cleanup > > - output cleanup, remove useless toggling of alarm flag in rtc probe > > - updated bindings description, so patch 1/5 becomes 2/6 and so on > > > > Changes in v2: > > - no dead code in irq code > > - various improvements and cleanups in rtc driver itself > > > > Andreas Kemnade (5): > > dt-bindings: mfd: rn5t618: Document optional property interrupts > > mfd: rn5t618: add IRQ support > > mfd: rn5t618: add RTC related registers > > mfd: rn5t618: add more subdevices > > rtc: rc5t619: add ricoh rc5t619 RTC driver > > what has happened to this series? > It looks like something got lost so that it has not yet arrived in linux-next. It won't show up in -next until it's been reviewed/applied. If it's not been touched for a few weeks/months, assume it's slipped through the gaps, collect all of the *-bys and submit a [RESEND]. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
