Re: [PATCH v3 3/4] dt-bindings: display: imx: add bindings for DCSS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lucas,

On Mon, Feb 24, 2020 at 06:21:57PM +0100, Lucas Stach wrote:
> On Fr, 2019-12-06 at 11:52 +0200, Laurentiu Palcu wrote:
> > Add bindings for iMX8MQ Display Controller Subsystem.
> > 
> > Signed-off-by: Laurentiu Palcu <laurentiu.palcu@xxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > ---
> >  .../bindings/display/imx/nxp,imx8mq-dcss.yaml      | 86 ++++++++++++++++++++++
> >  1 file changed, 86 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> > new file mode 100644
> > index 00000000..efd2494
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright 2019 NXP
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#";
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> > +
> > +title: iMX8MQ Display Controller Subsystem (DCSS)
> > +
> > +maintainers:
> > +  - Laurentiu Palcu <laurentiu.palcu@xxxxxxx>
> > +
> > +description:
> > +
> > +  The DCSS (display controller sub system) is used to source up to three
> > +  display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
> > +  2.2) or MIPI-DSI.
> 
> HDMI 2.0a and MIPI_DSI are not really properties of the DCSS, but
> rather the connected bridges. Maybe just drop them here?

I'm a bit confused... Drop what here?

> 
> >  The DCSS is intended to support up to 4kp60 displays. HDR10
> > +  image processing capabilities are included to provide a solution capable of
> > +  driving next generation high dynamic range displays.
> > +
> > +properties:
> > +  compatible:
> > +    const: nxp,imx8mq-dcss
> > +
> > +  reg:
> > +    maxItems: 2
> > +
> > +  interrupts:
> > +    maxItems: 3
> > +    items:
> > +      - description: Context loader completion and error interrupt
> > +      - description: DTG interrupt used to signal context loader trigger time
> > +      - description: DTG interrupt for Vblank
> > +
> > +  interrupt-names:
> > +    maxItems: 3
> > +    items:
> > +      - const: ctx_ld
> 
> Can we make this just "ctxld" for a bit more consistency with the name
> below?

Fair enough. Will change.

> 
> > +      - const: ctxld_kick
> > +      - const: vblank
> > +
> > +  clocks:
> > +    maxItems: 5
> > +    items:
> > +      - description: Display APB clock for all peripheral PIO access interfaces
> > +      - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
> > +      - description: RTRAM clock
> > +      - description: Pixel clock, can be driver either by HDMI phy clock or MIPI
> > +      - description: DTRC clock, needed by video decompressor
> > +
> > +  clock-names:
> > +    items:
> > +      - const: apb
> > +      - const: axi
> > +      - const: rtrm
> > +      - const: pix
> > +      - const: dtrc
> > +
> > +  port@0:
> > +    type: object
> > +    description: A port node pointing to a hdmi_in or mipi_in port node.
> 
> "A port node pointing to the input port of a HDMI/DP or MIPI display
> bridge".

Okay, your description's sounds better. I'll add it in the next revision.

Thanks,
laurentiu

> 
> > +
> > +examples:
> > +  - |
> > +    dcss: display-controller@32e00000 {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +        compatible = "nxp,imx8mq-dcss";
> > +        reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>;
> > +        interrupts = <6>, <8>, <9>;
> > +        interrupt-names = "ctx_ld", "ctxld_kick", "vblank";
> > +        interrupt-parent = <&irqsteer>;
> > +        clocks = <&clk 248>, <&clk 247>, <&clk 249>,
> > +                 <&clk 254>,<&clk 122>;
> > +        clock-names = "apb", "axi", "rtrm", "pix", "dtrc";
> > +        assigned-clocks = <&clk 107>, <&clk 109>, <&clk 266>;
> > +        assigned-clock-parents = <&clk 78>, <&clk 78>, <&clk 3>;
> > +        assigned-clock-rates = <800000000>,
> > +                               <400000000>;
> > +        port@0 {
> > +            dcss_out: endpoint {
> > +                remote-endpoint = <&hdmi_in>;
> > +            };
> > +        };
> > +    };
> > +
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Laurentiu
NXP



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux