From: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> Moved '/drivers/staging/wilc1000//microchip,wilc1000,spi.yaml' to 'Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml'. Signed-off-by: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> --- .../net/wireless/microchip,wilc1000,spi.yaml | 61 +++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml new file mode 100644 index 000000000000..cc8ed64ce627 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip WILC wireless SPI devicetree bindings + +maintainers: + - Adham Abozaeid <adham.abozaeid@xxxxxxxxxxxxx> + - Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> + +description: + The wilc1000 chips can be connected via SPI. This document describes + the binding for the SPI connected module. + +properties: + compatible: + const: microchip,wilc1000-spi + + spi-max-frequency: + description: Maximum SPI clocking speed of device in Hz. + maxItems: 1 + + reg: + description: Chip select address of device. + maxItems: 1 + + irq-gpios: + description: The GPIO phandle connect to a host IRQ. + maxItems: 1 + + clocks: + description: phandle to the clock connected on rtc clock line. + maxItems: 1 + +required: + - compatible + - spi-max-frequency + - reg + - irq-gpios + +examples: + - | + spi1: spi@fc018000 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&pioB 21 0>; + status = "okay"; + wilc_spi@0 { + compatible = "microchip,wilc1000-spi"; + spi-max-frequency = <48000000>; + reg = <0>; + irq-gpios = <&pioC 27 0>; + clocks = <&pck1>; + clock-names = "rtc_clk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <32768>; + status = "okay"; + }; + }; -- 2.24.0
