From: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> Moved '/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml' to 'Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml'. Signed-off-by: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> --- .../net/wireless/microchip,wilc1000,sdio.yaml | 68 +++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml new file mode 100644 index 000000000000..b338f569f7e2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,sdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip WILC wireless SDIO devicetree bindings + +maintainers: + - Adham Abozaeid <adham.abozaeid@xxxxxxxxxxxxx> + - Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> + +description: + The wilc1000 chips can be connected via SDIO. The node is used to + specify child node to the SDIO controller that connects the device + to the system. + +properties: + compatible: + const: microchip,wilc1000-sdio + + irq-gpios: + description: The GPIO phandle connect to a host IRQ. + maxItems: 1 + + reg: + description: Slot ID used in the controller. + maxItems: 1 + + clocks: + description: phandle to the clock connected on rtc clock line. + maxItems: 1 + + bus-width: + description: The number of data lines wired up the slot. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 4, 8] + - default: 1 + +required: + - compatible + - irq-gpios + - reg + +examples: + - | + mmc1: mmc@fc000000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + non-removable; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + wilc_sdio@0 { + compatible = "microchip,wilc1000-sdio"; + irq-gpios = <&pioC 27 0>; + reg = <0>; + clocks = <&pck1>; + clock-names = "rtc_clk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <32768>; + status = "okay"; + bus-width = <4>; + }; + }; -- 2.24.0
