We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty until the child
devices are probing with ti-sysc interconnect driver.
Note that we also fix a harmless typo for the node name, it's
dispc@400, not dispc@4000.
Cc: Jyri Sarha <jsarha@xxxxxx>
Cc: Keerthy <j-keerthy@xxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/am437x-l4.dtsi | 36 ++++++++++++++++++++++++++------
1 file changed, 30 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2150,15 +2150,39 @@ dss: dss@0 {
<0x00000c00 0x00000c00 0x00000400>,
<0x00001000 0x00001000 0x00001000>;
- dispc: dispc@4000 {
- compatible = "ti,omap3-dispc";
- reg = <0x400 0x400>;
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ target-module@400 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "dss_dispc";
- clocks = <&disp_clk>;
+ reg = <0x400 0x4>,
+ <0x410 0x4>,
+ <0x414 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x400 0x400>;
- max-memory-bandwidth = <230000000>;
+ dispc: dispc@0 {
+ compatible = "ti,omap3-dispc";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+
+ max-memory-bandwidth = <230000000>;
+ };
};
rfbi: rfbi@800 {
--
2.25.1
