Re: [PATCH net-next v3 1/2] net: mscc: ocelot: Add support for tcam

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Vladimir,

The 02/24/2020 12:38, Vladimir Oltean wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hi Horatiu,
> 
> On Fri, 31 May 2019 at 10:18, Horatiu Vultur
> <horatiu.vultur@xxxxxxxxxxxxx> wrote:
> >
> > Add ACL support using the TCAM. Using ACL it is possible to create rules
> > in hardware to filter/redirect frames.
> >
> > Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> > ---
> >  arch/mips/boot/dts/mscc/ocelot.dtsi      |   5 +-
> >  drivers/net/ethernet/mscc/Makefile       |   2 +-
> >  drivers/net/ethernet/mscc/ocelot.c       |  13 +
> >  drivers/net/ethernet/mscc/ocelot.h       |   8 +
> >  drivers/net/ethernet/mscc/ocelot_ace.c   | 777 +++++++++++++++++++++++++++++++
> >  drivers/net/ethernet/mscc/ocelot_ace.h   | 227 +++++++++
> >  drivers/net/ethernet/mscc/ocelot_board.c |   1 +
> >  drivers/net/ethernet/mscc/ocelot_regs.c  |  11 +
> >  drivers/net/ethernet/mscc/ocelot_s2.h    |  64 +++
> >  drivers/net/ethernet/mscc/ocelot_vcap.h  | 403 ++++++++++++++++
> >  10 files changed, 1508 insertions(+), 3 deletions(-)
> >  create mode 100644 drivers/net/ethernet/mscc/ocelot_ace.c
> >  create mode 100644 drivers/net/ethernet/mscc/ocelot_ace.h
> >  create mode 100644 drivers/net/ethernet/mscc/ocelot_s2.h
> >  create mode 100644 drivers/net/ethernet/mscc/ocelot_vcap.h
> >
> 
> I was testing this functionality and it looks like the MAC_ETYPE keys
> (src_mac, dst_mac) only match non-IP frames.
> Example, this rule doesn't drop ping traffic:
> 
> tc qdisc add dev swp0 clsact
> tc filter add dev swp0 ingress flower skip_sw dst_mac
> 96:e1:ef:64:1b:44 action drop
> 
> Would it be possible to do anything about that?

What you could do is to configure each port in such a way, to treat IP
frames as MAC_ETYPE frames. Have a look in ANA:PORT[0-11]:VCAP_S2_CFG.

There might be a problem with this approach. If you configure the port
in such a way, then all your rules with the keys IP6, IP4 will not be
match on that port.

> 
> Thanks,
> -Vladimir

-- 
/Horatiu



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux