Hi Krzysztof, On Thu, 13 Feb 2020 at 21:13, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote: > > On Thu, Feb 13, 2020 at 06:58:51PM +0530, Anand Moon wrote: > > hi Krzysztof, > > > > On Thu, 13 Feb 2020 at 15:47, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote: > > > > > > On Wed, Feb 12, 2020 at 12:02:35PM +0000, Anand Moon wrote: > > > > This patches add the power domain for MMC driver, > > > > but somehow the suspend/resume feature is broken > > > > so any input on how to fix this. > > > > > > I think S2R was working on XU3-family after Marek's fixes, so you mean > > > that these patches break it? > > > > > Yes I my testing mmc driver failed to come up after suspend. > > Patches breaking systems should be clearly marked as work in progress, > e.g. by using RFC instead of PATCH in the title. > > This patchset cannot be applied. > Ok > You probably have to figure out some missing dependencies, e.g. in > clocks/power domains/pinctrl. > I have tried to add some more missing code, but this FSYS2 power domain power off during suspend and their is no resume after this. Do know why. [root@alarm ~]# echo N | sudo tee /sys/module/printk/parameters/console_suspend N [root@alarm ~]# echo 1 > /sys/power/pm_debug_messages [root@alarm ~]# time rtcwake -s 60 -m mem rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc0 at Mon Feb 24 05:18:02 2020 [ 81.955425] PM: suspend entry (deep) [ 81.961793] Filesystems sync: 0.003 seconds [ 81.978051] Freezing user space processes ... (elapsed 0.009 seconds) done. [ 81.993635] OOM killer disabled. [ 81.996531] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 82.229718] wake enabled for irq 160 [ 82.445441] wake enabled for irq 164 [ 82.461752] samsung-pinctrl 13400000.pinctrl: Setting external wakeup interrupt mask: 0xffffffe7 [ 82.481095] Disabling non-boot CPUs ... My observation, all the device get suspended and USB device come alive after resume. since mmc device is in sill in suspended state it dose not resume. So can we stop the FSYS2 power domain to getting disabled during suspend. Or is their any other thing I am missing. How to enable more debug print for power management ? How can I debug future ? -Anand
