Re: R: [PATCH v4 1/2] net: mdio: add ipq8064 mdio driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 21, 2020 at 02:58:55PM +0100, ansuelsmth@xxxxxxxxx wrote:
> > On Fri, Feb 21, 2020 at 02:28:31PM +0100, Ansuel Smith wrote:
> > > Currently ipq806x soc use generi bitbang driver to
> > > comunicate with the gmac ethernet interface.
> > > Add a dedicated driver created by chunkeey to fix this.
> > >
> > > Christian Lamparter <chunkeey@xxxxxxxxx>
> > > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > > ---
> > >  drivers/net/phy/Kconfig        |   8 ++
> > >  drivers/net/phy/Makefile       |   1 +
> > >  drivers/net/phy/mdio-ipq8064.c | 166
> > +++++++++++++++++++++++++++++++++
> > >  3 files changed, 175 insertions(+)
> > >  create mode 100644 drivers/net/phy/mdio-ipq8064.c
> > >
> > > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> > > index 9dabe03a668c..ec2a5493a7e8 100644
> > > --- a/drivers/net/phy/Kconfig
> > > +++ b/drivers/net/phy/Kconfig
> > > @@ -157,6 +157,14 @@ config MDIO_I2C
> > >
> > >  	  This is library mode.
> > >
> > > +config MDIO_IPQ8064
> > > +	tristate "Qualcomm IPQ8064 MDIO interface support"
> > > +	depends on HAS_IOMEM && OF_MDIO
> > > +	depends on MFD_SYSCON
> > > +	help
> > > +	  This driver supports the MDIO interface found in the network
> > > +	  interface units of the IPQ8064 SoC
> > > +
> > >  config MDIO_MOXART
> > >  	tristate "MOXA ART MDIO interface support"
> > >  	depends on ARCH_MOXART || COMPILE_TEST
> > > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> > > index fe5badf13b65..8f02bd2089f3 100644
> > > --- a/drivers/net/phy/Makefile
> > > +++ b/drivers/net/phy/Makefile
> > > @@ -36,6 +36,7 @@ obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-
> > cavium.o
> > >  obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
> > >  obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
> > >  obj-$(CONFIG_MDIO_I2C)		+= mdio-i2c.o
> > > +obj-$(CONFIG_MDIO_IPQ8064)	+= mdio-ipq8064.o
> > >  obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
> > >  obj-$(CONFIG_MDIO_MSCC_MIIM)	+= mdio-mscc-miim.o
> > >  obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
> > > diff --git a/drivers/net/phy/mdio-ipq8064.c b/drivers/net/phy/mdio-
> > ipq8064.c
> > > new file mode 100644
> > > index 000000000000..fd856b798194
> > > --- /dev/null
> > > +++ b/drivers/net/phy/mdio-ipq8064.c
> > > @@ -0,0 +1,166 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +//
> > > +// Qualcomm IPQ8064 MDIO interface driver
> > > +//
> > > +// Copyright (C) 2019 Christian Lamparter <chunkeey@xxxxxxxxx>
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/module.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/of_mdio.h>
> > > +#include <linux/phy.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/mfd/syscon.h>
> > > +
> > > +/* MII address register definitions */
> > > +#define MII_ADDR_REG_ADDR                       0x10
> > > +#define MII_BUSY                                BIT(0)
> > > +#define MII_WRITE                               BIT(1)
> > > +#define MII_CLKRANGE_60_100M                    (0 << 2)
> > > +#define MII_CLKRANGE_100_150M                   (1 << 2)
> > > +#define MII_CLKRANGE_20_35M                     (2 << 2)
> > > +#define MII_CLKRANGE_35_60M                     (3 << 2)
> > > +#define MII_CLKRANGE_150_250M                   (4 << 2)
> > > +#define MII_CLKRANGE_250_300M                   (5 << 2)
> > > +#define MII_CLKRANGE_MASK			GENMASK(4, 2)
> > > +#define MII_REG_SHIFT				6
> > > +#define MII_REG_MASK				GENMASK(10, 6)
> > > +#define MII_ADDR_SHIFT				11
> > > +#define MII_ADDR_MASK				GENMASK(15, 11)
> > > +
> > > +#define MII_DATA_REG_ADDR                       0x14
> > > +
> > > +#define MII_MDIO_DELAY                          (1000)
> > > +#define MII_MDIO_RETRY                          (10)
> > 
> > You've missed my comments on these.

And did you miss this again?

> > 
> > > +
> > > +struct ipq8064_mdio {
> > > +	struct regmap *base; /* NSS_GMAC0_BASE */
> > > +};
> > > +
> > > +static int
> > > +ipq8064_mdio_wait_busy(struct ipq8064_mdio *priv)
> > > +{
> > > +	u32 busy;
> > > +
> > > +	return regmap_read_poll_timeout(priv->base,
> > MII_ADDR_REG_ADDR, busy,
> > > +				   !(busy & MII_BUSY), MII_MDIO_DELAY,
> > > +				   MII_MDIO_RETRY * USEC_PER_MSEC);
> > > +}
> > > +
> > > +static int
> > > +ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
> > > +{
> > > +	struct ipq8064_mdio *priv = bus->priv;
> > > +	u32 miiaddr = MII_BUSY | MII_CLKRANGE_250_300M;
> > > +	u32 ret_val;
> > > +	int err;
> > > +
> > > +	/* Reject clause 45 */
> > > +	if (reg_offset & MII_ADDR_C45)
> > > +		return -EOPNOTSUPP;
> > > +
> > > +	miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
> > > +		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
> > > +
> > > +	regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
> > > +	usleep_range(10, 20);
> > > +
> > > +	err = ipq8064_mdio_wait_busy(priv);
> > > +	if (err)
> > > +		return err;
> > > +
> > > +	regmap_read(priv->base, MII_DATA_REG_ADDR, &ret_val);
> > > +	return (int)ret_val;
> > > +}
> > > +
> > > +static int
> > > +ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset,
> > u16 data)
> > > +{
> > > +	struct ipq8064_mdio *priv = bus->priv;
> > > +	u32 miiaddr = MII_WRITE | MII_BUSY | MII_CLKRANGE_250_300M;
> > > +
> > > +	/* Reject clause 45 */
> > > +	if (reg_offset & MII_ADDR_C45)
> > > +		return -EOPNOTSUPP;
> > > +
> > > +	regmap_write(priv->base, MII_DATA_REG_ADDR, data);
> > > +
> > > +	miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
> > > +		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
> > > +
> > > +	regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
> > > +	usleep_range(10, 20);
> > > +
> > > +	return ipq8064_mdio_wait_busy(priv);
> > > +}
> > > +
> > > +static int
> > > +ipq8064_mdio_probe(struct platform_device *pdev)
> > > +{
> > > +	struct device_node *np = pdev->dev.of_node;
> > > +	struct ipq8064_mdio *priv;
> > > +	struct mii_bus *bus;
> > > +	int ret;
> > > +
> > > +	bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
> > > +	if (!bus)
> > > +		return -ENOMEM;
> > > +
> > > +	bus->name = "ipq8064_mdio_bus";
> > > +	bus->read = ipq8064_mdio_read;
> > > +	bus->write = ipq8064_mdio_write;
> > > +	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev-
> > >dev));
> > > +	bus->parent = &pdev->dev;
> > > +
> > > +	priv = bus->priv;
> > > +	priv->base = syscon_node_to_regmap(np);
> > > +	if (IS_ERR(priv->base) && priv->base != ERR_PTR(-EPROBE_DEFER))
> > > +		priv->base = syscon_regmap_lookup_by_phandle(np,
> > "master");
> > > +
> > > +	if (priv->base == ERR_PTR(-EPROBE_DEFER)) {
> > > +		return -EPROBE_DEFER;
> > > +	} else if (IS_ERR(priv->base)) {
> > > +		dev_err(&pdev->dev, "error getting syscon regmap,
> > error=%ld\n",
> > > +			PTR_ERR(priv->base));
> > 
> > Why not %pe as I suggested, which is documented in printk-formats to
> > optionally give a symbolic error string.
> > 
> I thought that print the error code was better than error=(ptrval)
> If I need to follow the documentation then sorry, I will restore %pe
> > > +		return PTR_ERR(priv->base);
> > > +	}
> > 
> > And have you even tested the above - you haven't said whether you have
> > or not...
> > 
> Yes I tested the changes, it does errors correctly.
> > > +
> > > +	ret = of_mdiobus_register(bus, np);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	platform_set_drvdata(pdev, bus);
> > > +	return 0;
> > > +}
> > > +
> > > +static int
> > > +ipq8064_mdio_remove(struct platform_device *pdev)
> > > +{
> > > +	struct mii_bus *bus = platform_get_drvdata(pdev);
> > > +
> > > +	mdiobus_unregister(bus);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct of_device_id ipq8064_mdio_dt_ids[] = {
> > > +	{ .compatible = "qcom,ipq8064-mdio" },
> > > +	{ }
> > > +};
> > > +MODULE_DEVICE_TABLE(of, ipq8064_mdio_dt_ids);
> > > +
> > > +static struct platform_driver ipq8064_mdio_driver = {
> > > +	.probe = ipq8064_mdio_probe,
> > > +	.remove = ipq8064_mdio_remove,
> > > +	.driver = {
> > > +		.name = "ipq8064-mdio",
> > > +		.of_match_table = ipq8064_mdio_dt_ids,
> > > +	},
> > > +};
> > > +
> > > +module_platform_driver(ipq8064_mdio_driver);
> > > +
> > > +MODULE_DESCRIPTION("Qualcomm IPQ8064 MDIO interface driver");
> > > +MODULE_AUTHOR("Christian Lamparter <chunkeey@xxxxxxxxx>");
> > > +MODULE_LICENSE("GPL");
> > > --
> > > 2.25.0
> > >
> > >
> > 
> > --
> > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> > FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down
> > 622kbps up
> > According to speedtest.net: 11.9Mbps down 500kbps up
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux