Convert the UniPhier AIDET (ARM Interrupt Detector) binding to DT
schema format.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
Some qeustions:
I was wondering when 'additionalProperties: false' should be added.
If I add it to a bus controller device (e.g. I2C),
I see some schema warnings because various sub-nodes
are added depending on which device you connect.
On the other hand, the interrupt controller like this
does not have a subnode.
So, probably this is the case where we can add
'additionalProperties: false'.
Is this correct?
One more thing.
There are multiple ways to do a similar thing:
compatible:
enum:
- socionext,uniphier-ld4-aidet
- socionext,uniphier-pro4-aidet
...
vs
compatible:
oneOf:
- const: socionext,uniphier-ld4-aidet
- const: socionext,uniphier-pro4-aidet
...
I adopted the former because I can save 'const'.
If there is a preferred way, I will follow it.
.../socionext,uniphier-aidet.txt | 32 ----------
.../socionext,uniphier-aidet.yaml | 61 +++++++++++++++++++
2 files changed, 61 insertions(+), 32 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
deleted file mode 100644
index 48e71d3ac2ad..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-UniPhier AIDET
-
-UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic
-Interrupt Controller). GIC itself can handle only high level and rising edge
-interrupts. The AIDET provides logic inverter to support low level and falling
-edge interrupts.
-
-Required properties:
-- compatible: Should be one of the following:
- "socionext,uniphier-ld4-aidet" - for LD4 SoC
- "socionext,uniphier-pro4-aidet" - for Pro4 SoC
- "socionext,uniphier-sld8-aidet" - for sLD8 SoC
- "socionext,uniphier-pro5-aidet" - for Pro5 SoC
- "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC
- "socionext,uniphier-ld11-aidet" - for LD11 SoC
- "socionext,uniphier-ld20-aidet" - for LD20 SoC
- "socionext,uniphier-pxs3-aidet" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an interrupt
- source. The value should be 2. The first cell defines the interrupt number
- (corresponds to the SPI interrupt number of GIC). The second cell specifies
- the trigger type as defined in interrupts.txt in this directory.
-
-Example:
-
- aidet: aidet@5fc20000 {
- compatible = "socionext,uniphier-pro4-aidet";
- reg = <0x5fc20000 0x200>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
new file mode 100644
index 000000000000..e61748df2e2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,uniphier-aidet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier AIDET
+
+description: |
+ UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC
+ (Generic Interrupt Controller). GIC itself can handle only high level and
+ rising edge interrupts. The AIDET provides logic inverter to support low
+ level and falling edge interrupts.
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-ld4-aidet
+ - socionext,uniphier-pro4-aidet
+ - socionext,uniphier-sld8-aidet
+ - socionext,uniphier-pro5-aidet
+ - socionext,uniphier-pxs2-aidet
+ - socionext,uniphier-ld6b-aidet
+ - socionext,uniphier-ld11-aidet
+ - socionext,uniphier-ld20-aidet
+ - socionext,uniphier-pxs3-aidet
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description: |
+ The first cell defines the interrupt number (corresponds to the SPI
+ interrupt number of GIC). The second cell specifies the trigger type as
+ defined in interrupts.txt in this directory.
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ aidet: aidet@5fc20000 {
+ compatible = "socionext,uniphier-pro4-aidet";
+ reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
--
2.17.1
