On Mon, Feb 10, 2020 at 04:50:52PM -0800, Bjorn Andersson wrote: > Add a devicetree binding for the Qualcomm periperal image loader s/periperal/peripheral > relocation info region found in the IMEM. s/info/information > > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > --- > > Changes since v2: > - Replaced offset with reg to describe the region of IMEM used for the entries > > .../bindings/remoteproc/qcom,pil-info.yaml | 42 +++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > new file mode 100644 > index 000000000000..8386a4da6030 > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml > @@ -0,0 +1,42 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm peripheral image loader relocation info binding > + > +maintainers: > + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > + > +description: > + This document defines the binding for describing the Qualcomm peripheral > + image loader relocation memory region, in IMEM, which is used for post mortem > + debugging of remoteprocs. > + > +properties: > + compatible: > + const: qcom,pil-reloc-info > + > + reg: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + imem@146bf000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0 0x146bf000 0 0x1000>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + > + pil-reloc { > + compatible ="qcom,pil-reloc-info"; s/="/= " > + reg = <0x94c 200>; > + }; > + }; > +... > -- > 2.24.0 >
