On 2/19/20 3:56 PM, Rob Herring wrote: > On Tue, Jan 28, 2020 at 11:46:04PM -0600, frowand.list@xxxxxxxxx wrote: >> From: Frank Rowand <frank.rowand@xxxxxxxx> >> >> Geert reports that gpio hog nodes are not properly processed when >> the gpio hog node is added via an overlay reply and provides an >> RFC patch to fix the problem [1]. >> >> Add a unittest that shows the problem. Unittest will report "1 failed" >> test before applying Geert's RFC patch and "0 failed" after applying >> Geert's RFC patch. > > What's the status of that? I don't want to leave the tests failing at > least outside of a kernel release. I agree. I would like to see my patches applied, showing the test fail, immediately followed by Geert's fix. So my series should not go in until Geert's patch is ready. > >> >> [1] https://lore.kernel.org/linux-devicetree/20191230133852.5890-1-geert+renesas@xxxxxxxxx/ >> >> Signed-off-by: Frank Rowand <frank.rowand@xxxxxxxx> >> --- >> >> There are checkpatch warnings. >> - New files are in a directory already covered by MAINTAINERS >> - The undocumented compatibles are restricted to use by unittest >> and should not be documented under Documentation >> - The printk() KERN_<LEVEL> warnings are false positives. The level >> is supplied by a define parameter instead of a hard coded constant >> - The lines over 80 characters are consistent with unittest.c style >> >> This unittest was also valuable in that it allowed me to explore >> possible issues related to the proposed solution to the gpio hog >> problem. >> >> changes since RFC: >> - fixed node names in overlays >> - removed unused fields from struct unittest_gpio_dev >> - of_unittest_overlay_gpio() cleaned up comments >> - of_unittest_overlay_gpio() moved saving global values into >> probe_pass_count and chip_request_count more tightly around >> test code expected to trigger changes in the global values >> >> drivers/of/unittest-data/Makefile | 8 +- >> drivers/of/unittest-data/overlay_gpio_01.dts | 23 +++ >> drivers/of/unittest-data/overlay_gpio_02a.dts | 16 ++ >> drivers/of/unittest-data/overlay_gpio_02b.dts | 16 ++ >> drivers/of/unittest-data/overlay_gpio_03.dts | 23 +++ >> drivers/of/unittest-data/overlay_gpio_04a.dts | 16 ++ >> drivers/of/unittest-data/overlay_gpio_04b.dts | 16 ++ >> drivers/of/unittest.c | 255 ++++++++++++++++++++++++++ >> 8 files changed, 372 insertions(+), 1 deletion(-) >> create mode 100644 drivers/of/unittest-data/overlay_gpio_01.dts >> create mode 100644 drivers/of/unittest-data/overlay_gpio_02a.dts >> create mode 100644 drivers/of/unittest-data/overlay_gpio_02b.dts >> create mode 100644 drivers/of/unittest-data/overlay_gpio_03.dts >> create mode 100644 drivers/of/unittest-data/overlay_gpio_04a.dts >> create mode 100644 drivers/of/unittest-data/overlay_gpio_04b.dts >> >> diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile >> index 9b6807065827..009f4045c8e4 100644 >> --- a/drivers/of/unittest-data/Makefile >> +++ b/drivers/of/unittest-data/Makefile >> @@ -21,7 +21,13 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \ >> overlay_bad_add_dup_prop.dtb.o \ >> overlay_bad_phandle.dtb.o \ >> overlay_bad_symbol.dtb.o \ >> - overlay_base.dtb.o >> + overlay_base.dtb.o \ >> + overlay_gpio_01.dtb.o \ >> + overlay_gpio_02a.dtb.o \ >> + overlay_gpio_02b.dtb.o \ >> + overlay_gpio_03.dtb.o \ >> + overlay_gpio_04a.dtb.o \ >> + overlay_gpio_04b.dtb.o >> >> # enable creation of __symbols__ node >> DTC_FLAGS_overlay += -@ >> diff --git a/drivers/of/unittest-data/overlay_gpio_01.dts b/drivers/of/unittest-data/overlay_gpio_01.dts >> new file mode 100644 >> index 000000000000..f039e8bce3b6 >> --- /dev/null >> +++ b/drivers/of/unittest-data/overlay_gpio_01.dts >> @@ -0,0 +1,23 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/dts-v1/; >> +/plugin/; >> + >> +&unittest_test_bus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + gpio_01 { > > Missing unit address: > > gpio@0 But my changelog claimed that I fixed that, isn't that good enough? :-) /me pulls big brown paper bag over head. And the same for all the issues you point out below, for the second patch version in a row. I'll re-spin on 5.6-rc1 and truly include the fixes. -Frank > > >> + compatible = "unittest-gpio"; >> + reg = <0>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + ngpios = <2>; >> + gpio-line-names = "line-A", "line-B"; >> + >> + line_b { > > Don't use '_'. > > line-b > >> + gpio-hog; >> + gpios = <2 0>; >> + input; >> + line-name = "line-B-input"; >> + }; >> + }; >> +}; >> diff --git a/drivers/of/unittest-data/overlay_gpio_02a.dts b/drivers/of/unittest-data/overlay_gpio_02a.dts >> new file mode 100644 >> index 000000000000..cdafab604793 >> --- /dev/null >> +++ b/drivers/of/unittest-data/overlay_gpio_02a.dts >> @@ -0,0 +1,16 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/dts-v1/; >> +/plugin/; >> + >> +&unittest_test_bus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + gpio_02 { > > gpio@1 > > ...and a few more. > >> + compatible = "unittest-gpio"; >> + reg = <1>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + ngpios = <2>; >> + gpio-line-names = "line-A", "line-B"; >> + }; >> +}; >