On Monday, May 12, 2014 3:45 PM, Rahul Sharma wrote:
>
> From: Rahul Sharma <Rahul.Sharma@xxxxxxxxxxx>
>
> Enable display controller with timing information for 1080p
> panel in Exynos5800 peach-pi board.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@xxxxxxxxxxx>
Reviewed-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
Best regards,
Jingoo Han
> ---
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 36 +++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index 742655b..426705a 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -72,6 +72,13 @@
> samsung,pin-pud = <0>;
> samsung,pin-drv = <0>;
> };
> +
> + dp_hpd_gpio: dp_hpd_gpio {
> + samsung,pins = "gpx2-6";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> };
>
> &rtc {
> @@ -121,6 +128,35 @@
> };
> };
>
> +&dp {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_hpd_gpio>;
> + samsung,color-space = <0>;
> + samsung,dynamic-range = <0>;
> + samsung,ycbcr-coeff = <0>;
> + samsung,color-depth = <1>;
> + samsung,link-rate = <0x0a>;
> + samsung,lane-count = <2>;
> + samsung,hpd-gpio = <&gpx2 6 0>;
> +
> + display-timings {
> + native-mode = <&timing1>;
> +
> + timing1: timing@1 {
> + clock-frequency = <150660000>;
> + hactive = <1920>;
> + vactive = <1080>;
> + hfront-porch = <60>;
> + hback-porch = <172>;
> + hsync-len = <80>;
> + vback-porch = <25>;
> + vfront-porch = <10>;
> + vsync-len = <10>;
> + };
> + };
> +};
> +
> &hsi2c_9 {
> status = "okay";
> clock-frequency = <400000>;
> --
> 1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
