Hi Akash, I didn't see a patch that implements the binding, did you post it? On Mon, Feb 17, 2020 at 03:06:52PM +0530, Akash Asthana wrote: > Add documentation to support RX/TX/CTS/RTS pin swap in HW. > > Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > index 11530df..7e4b9af 100644 > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml > @@ -165,6 +165,15 @@ patternProperties: > - description: UART core irq > - description: Wakeup irq (RX GPIO) > > + rx-tx-swap: > + description: RX and TX pins are swap. s/swap/swapped/ > + > + cts-rts-swap: > + description: CTS and RTS pins are swap. s/swap/swapped/ > + > + rx-tx-cts-rts-swap: > + description: RX-TX and CTS-RTS both pairs are swap. I don't think this option adds much value, if both pairs are swapped the above two properties can be set. > + > required: > - compatible > - interrupts > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
