Cc: devicetree@xxxxxxxxxxxxxxx Signed-off-by: Rob Herring <robh@xxxxxxxxxx> --- .../devicetree/bindings/arm/calxeda.yaml | 22 ---------- .../devicetree/bindings/arm/calxeda/l2ecc.txt | 15 ------- .../devicetree/bindings/ata/sata_highbank.txt | 44 ------------------- .../devicetree/bindings/clock/calxeda.txt | 17 ------- .../memory-controllers/calxeda-ddr-ctrlr.txt | 16 ------- .../devicetree/bindings/net/calxeda-xgmac.txt | 18 -------- .../bindings/phy/calxeda-combophy.txt | 17 ------- 7 files changed, 149 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/calxeda.yaml delete mode 100644 Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt delete mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt delete mode 100644 Documentation/devicetree/bindings/clock/calxeda.txt delete mode 100644 Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt delete mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.txt delete mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.txt diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml deleted file mode 100644 index aa5571d23c39..000000000000 --- a/Documentation/devicetree/bindings/arm/calxeda.yaml +++ /dev/null @@ -1,22 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/calxeda.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Calxeda Platforms Device Tree Bindings - -maintainers: - - Rob Herring <robh@xxxxxxxxxx> -description: |+ - Bindings for boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC - or Cortex-A15 based ECX-2000 SOCs - -properties: - $nodename: - const: '/' - compatible: - items: - - enum: - - calxeda,highbank - - calxeda,ecx-2000 diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt deleted file mode 100644 index 94e642a33db0..000000000000 --- a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Calxeda Highbank L2 cache ECC - -Properties: -- compatible : Should be "calxeda,hb-sregs-l2-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. - -Example: - - sregs@fff3c200 { - compatible = "calxeda,hb-sregs-l2-ecc"; - reg = <0xfff3c200 0x100>; - interrupts = <0 71 4 0 72 4>; - }; diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt deleted file mode 100644 index aa83407cb7a4..000000000000 --- a/Documentation/devicetree/bindings/ata/sata_highbank.txt +++ /dev/null @@ -1,44 +0,0 @@ -* Calxeda AHCI SATA Controller - -SATA nodes are defined to describe on-chip Serial ATA controllers. -The Calxeda SATA controller mostly conforms to the AHCI interface -with some special extensions to add functionality. -Each SATA controller should have its own node. - -Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" -- interrupts : <interrupt mapping for SATA IRQ> -- reg : <registers mapping> - -Optional properties: -- dma-coherent : Present if dma operations are coherent -- calxeda,port-phys : phandle-combophy and lane assignment, which maps each - SATA port to a combophy and a lane within that - combophy -- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off, - which indicates that the driver supports SGPIO - indicator lights using the indicated GPIOs -- calxeda,led-order : a u32 array that map port numbers to offsets within the - SGPIO bitstream. -- calxeda,tx-atten : a u32 array that contains TX attenuation override - codes, one per port. The upper 3 bytes are always - 0 and thus ignored. -- calxeda,pre-clocks : a u32 that indicates the number of additional clock - cycles to transmit before sending an SGPIO pattern -- calxeda,post-clocks: a u32 that indicates the number of additional clock - cycles to transmit after sending an SGPIO pattern - -Example: - sata@ffe08000 { - compatible = "calxeda,hb-ahci"; - reg = <0xffe08000 0x1000>; - interrupts = <115>; - dma-coherent; - calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 - &combophy0 2 &combophy0 3>; - calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; - calxeda,led-order = <4 0 1 2 3>; - calxeda,tx-atten = <0xff 22 0xff 0xff 23>; - calxeda,pre-clocks = <10>; - calxeda,post-clocks = <0>; - }; diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt deleted file mode 100644 index 0a6ac1bdcda1..000000000000 --- a/Documentation/devicetree/bindings/clock/calxeda.txt +++ /dev/null @@ -1,17 +0,0 @@ -Device Tree Clock bindings for Calxeda highbank platform - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be one of the following: - "calxeda,hb-pll-clock" - for a PLL clock - "calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the - A9 clock. - "calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock. - "calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller. -- reg : shall be the control register offset from SYSREGs base for the clock. -- clocks : shall be the input parent clock phandle for the clock. This is - either an oscillator or a pll output. -- #clock-cells : from common clock binding; shall be set to 0. diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt deleted file mode 100644 index 049675944b78..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt +++ /dev/null @@ -1,16 +0,0 @@ -Calxeda DDR memory controller - -Properties: -- compatible : Should be: - - "calxeda,hb-ddr-ctrl" for ECX-1000 - - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000 -- reg : Address and size for DDR controller registers. -- interrupts : Interrupt for DDR controller. - -Example: - - memory-controller@fff00000 { - compatible = "calxeda,hb-ddr-ctrl"; - reg = <0xfff00000 0x1000>; - interrupts = <0 91 4>; - }; diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt deleted file mode 100644 index c8ae996bd8f2..000000000000 --- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Calxeda Highbank 10Gb XGMAC Ethernet - -Required properties: -- compatible : Should be "calxeda,hb-xgmac" -- reg : Address and length of the register set for the device -- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt. - The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt. - -Optional properties: -- dma-coherent : Present if dma operations are coherent - -Example: - -ethernet@fff50000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; -}; diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt b/Documentation/devicetree/bindings/phy/calxeda-combophy.txt deleted file mode 100644 index 6622bdb2e8bc..000000000000 --- a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt +++ /dev/null @@ -1,17 +0,0 @@ -Calxeda Highbank Combination Phys for SATA - -Properties: -- compatible : Should be "calxeda,hb-combophy" -- #phy-cells: Should be 1. -- reg : Address and size for Combination Phy registers. -- phydev: device ID for programming the combophy. - -Example: - - combophy5: combo-phy@fff5d000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff5d000 0x1000>; - phydev = <31>; - }; - -- 2.20.1
