This patch set adds and modify device tree nodes in the NPCM7xx
Baseboard Management Controller (BMC) device tree.
The following device node add:
- NPCM7xx Pin controller and GPIO
- NPCM7xx PWM and FAN.
- NPCM7xx EHCI USB.
- NPCM7xx KCS.
- NPCM Reset.
- NPCM Peripheral SPI.
- NPCM FIU SPI.
- NPCM HWRNG.
- NPCM I2C.
- STMicro STMMAC.
The following device node modified:
- NPCM7xx timer.
- NPCM7xx clock constants parameters.
NPCM7xx device tree tested on NPCM750 evaluation board.
Changes since version 3:
- Tested patches in Linux kernel 5.6.
Changes since version 2:
- Remove unnecessary ouput-enable flags.
Changes since version 1:
- Add NPCM reset device node.
- Add reset parameters to NPCM driver device nodes.
Tomer Maimon (3):
arm: dts: modify NPCM7xx device tree clock parameter to clock constant
arm: dts: modify NPCM7xx device tree timer register size
arm: dts: add new device nodes to NPCM750 device tree
arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 958 +++++++++++++++++-
arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 444 +++++++-
.../boot/dts/nuvoton-npcm750-pincfg-evb.dtsi | 157 +++
arch/arm/boot/dts/nuvoton-npcm750.dtsi | 24 +-
4 files changed, 1549 insertions(+), 34 deletions(-)
create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
--
2.22.0
