Use new pin names containing DCE/DTE for UART RX/TX/RTS/CTS pins, this
is to distinguish the DCE/DTE functions.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
Reviewed-by: Uwe Kleine-K枚nig <u.kleine-koenig@xxxxxxxxxxxxxx>
---
No change.
---
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 832b5c5..d84ea69 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -484,31 +484,31 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
- MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1
- MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1
+ MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX 0x1b0b1
+ MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
- MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
- MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
- MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1
- MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1
+ MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1
+ MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x1b0b1
+ MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x1b0b1
>;
};
--
2.7.4
