Use new pin names containing DCE/DTE for UART RX/TX/RTS/CTS pins, this
is to distinguish the DCE/DTE functions.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index 28563f2..61c7e72 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -384,15 +384,15 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1
>;
};
--
2.7.4
