On Wed, Jan 29, 2020 at 10:53:36PM +0100, Stefan Agner wrote: > From: Stefan Agner <stefan.agner@xxxxxxxxxxx> > > Add Colibri SODIMM numbers as GPIO line names on module level. The GPIO > lines with a name are all available on the SODIMM edge connector of the > Colibri iMX7 module and therefore a customer might use it as a GPIO. The > Toradex Evaluation Board has the SODIMM numbers printed on the silk- > screen. This allows a customer to quickly control a GPIO on a pin-header > by using the name printed next to it. > > Putting the GPIO line name on module level makes sure that a customer > gets a reasonable default. If more meaningful names are available on a > custom carrier board, the user can overwrite the line names in a carrier > board level device tree. > > The eMMC based modules share all GPIO names except two GPIOs on bank 6 > which are not available on the raw NAND devices. Hence overwrite GPIO > line names of bank 6 in the eMMC specific device tree file. > > Signed-off-by: Stefan Agner <stefan.agner@xxxxxxxxxxx> Applied, thanks.
