On 09/05/14 17:37, Tony Lindgren wrote: > * Tomi Valkeinen <tomi.valkeinen@xxxxxx> [140509 00:39]: >> On 30/04/14 02:52, Tony Lindgren wrote: >>> Otherwise we can get often errors like the following and the >>> display won't come on: >>> >>> omapdss APPLY error: FIFO UNDERFLOW on gfx, disabling the overlay >>> omapdss APPLY error: SYNC_LOST on channel lcd, restarting >>> the output with video overlays disabled >>> >>> There are some earlier references to this issue: >>> >>> http://www.spinics.net/lists/linux-omap/msg59511.html >>> http://www.spinics.net/lists/linux-omap/msg59724.html >> >> Those don't sound like the same issue, but it's hard to say. What kind >> of clock rates do you get? Cat you paste debugfs/omapdss/clk, with and >> without this patch? > > Without this patch: > # cat /sys/kernel/debug/omapdss/clk > [ 24.833831] DSS: dss_runtime_get > [ 24.837554] DSS: dss_runtime_put > [ 24.840972] DISPC: dispc_runtime_get > [ 24.844757] DISPC: dispc_runtime_put > - DSS - > DSS_FCK (DSS1_ALWON_FCLK) = 57600000 > - DISPC - > dispc fclk source = DSS_FCK (DSS1_ALWON_FCLK) > fck 57600000 > - LCD - > LCD clk source = DSS_FCK (DSS1_ALWON_FCLK) > lck 57600000 lck div 1 > pck 19200000 pck div 3 > > > With this patch: > # cat /sys/kernel/debug/omapdss/clk > [ 34.580688] DSS: dss_runtime_get > [ 34.584197] DSS: dss_runtime_put > [ 34.587768] DISPC: dispc_runtime_get > [ 34.591552] DISPC: dispc_runtime_put > - DSS - > DSS_FCK (DSS1_ALWON_FCLK) = 108000000 > - DISPC - > dispc fclk source = DSS_FCK (DSS1_ALWON_FCLK) > fck 108000000 > - LCD - > LCD clk source = DSS_FCK (DSS1_ALWON_FCLK) > lck 108000000 lck div 1 > pck 18000000 pck div 6 > >> What resolution do you have? If it's a very high resolution (say, DVI >> output to a monitor), it could just be an issue of >> not-enough-memory-bandwidth. > > This is just the 3730-evm with the Sharp VGA panel mentioned in > this series. Hmm, well, those both look fine. The fck is well below the maximum, which is somewhere around 170MHz-180MHz. The lck/pck ratio is higher with this patch, but that should affect the GFX overlay. So you're just booting, and there are no applications that use the framebuffer? And there is no rotation or such configured? Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
