Re: [PATCH RESEND 1/1] ARM: dts: imx7s: Add power domain for imx7d HSIC

[André Draszik <git@xxxxxxxxxx>]

On Tue, 2019-12-03 at 11:01 +0800, Peter Chen wrote:
> Otherwise, the system will hang if USB driver try to access
> portsc register.
> 
> Cc: André Draszik <git@xxxxxxxxxx>
> Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
> ---
>  arch/arm/boot/dts/imx7s.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index c1a4fff5ceda..a5b380f530f8 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -658,6 +658,12 @@
>  						reg = <1>;
>  						power-supply = <&reg_1p0d>;
>  					};
> +
> +					pgc_hsic_phy: power-domain@2 {
> +						#power-domain-cells = <0>;
> +						reg = <2>;
> +						power-supply = <&reg_1p2>;
> +					};
>  				};
>  			};
>  		};
> @@ -1101,6 +1107,7 @@
>  				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
>  				reg = <0x30b30000 0x200>;
>  				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> +				power-domains = <&pgc_hsic_phy>;
>  				clocks = <&clks IMX7D_USB_CTRL_CLK>;
>  				fsl,usbphy = <&usbphynop3>;
>  				fsl,usbmisc = <&usbmisc3 0>;

It's a bit late now, but for completeness, with this patch applied
the HSIC port works fine on my iMX7d board now.

Thanks Peter.

Tested-by: André Draszik <git@xxxxxxxxxx>


Cheers,
Andre'