Hi Rob,
On Thu, 30 Jan 2020 at 21:46, Vijay Khemka <vijaykhemka@xxxxxx> wrote:
>
> Adding IPMB devices for facebook tiogapass platform.
>
> Signed-off-by: Vijay Khemka <vijaykhemka@xxxxxx>
> ---
> arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
> index fb7f034d5db2..1cb5b9bf468f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
> @@ -5,6 +5,7 @@
>
> #include "aspeed-g5.dtsi"
> #include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
>
> / {
> model = "Facebook TiogaPass BMC";
> @@ -428,6 +429,12 @@
> &i2c4 {
> status = "okay";
> // BMC Debug Header
> + multi-master;
> + ipmb0@10 {
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
This causes dtc to warn:
../arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts:521.11-525.4:
Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@380/ipmb0@10: I2C
bus unit address format error, expected "40000010"
../arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts:523.3-30:
Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@380/ipmb0@10:reg:
I2C address must be less than 10-bits, got "0x40000010"
The bindings mention:
Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we listen to
be devices ourselves.
include/dt-bindings/i2c/i2c.h:#define I2C_OWN_SLAVE_ADDRESS (1 << 30)
It appears dtc needs to be fixed to not warn when seeing this value in
an i2c reg node?
Cheers,
Joel
> + i2c-protocol;
> + };
> };
>
> &i2c5 {
> @@ -509,6 +516,12 @@
> &i2c9 {
> status = "okay";
> //USB Debug Connector
> + multi-master;
> + ipmb0@10 {
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> };
>
> &pwm_tacho {
> --
> 2.17.1
>
