On Sun, May 11, 2014 at 10:17:27PM +0400, Sergei Shtylyov wrote:
> Hello.
>
> On 05/06/2014 02:45 AM, Sergei Shtylyov wrote:
>
> >Define the Henninger board dependent part of the QSPI device node.
> >Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it.
>
> >Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>
> >---
> >This patch is against 'renesas-devel-v3.15-rc3-20140502' tag of Simon Horman's
> >'renesas.git' repo and SDHI0/2 DT support patch posted last weekend.
>
> > arch/arm/boot/dts/r8a7791-henninger.dts | 38 ++++++++++++++++++++++++++++++++
> > 1 file changed, 38 insertions(+)
>
> >Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
> >===================================================================
> >--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
> >+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
> [...]
> >@@ -158,3 +163,36 @@
> > cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
> > status = "okay";
> > };
> >+
> >+&qspi {
> >+ pinctrl-0 = <&qspi_pins>;
> >+ pinctrl-names = "default";
> >+
> >+ status = "okay";
> >+
> >+ flash@0 {
> >+ #address-cells = <1>;
> >+ #size-cells = <1>;
> >+ compatible = "spansion,s25fl512s";
> >+ reg = <0>;
> >+ spi-max-frequency = <30000000>;
> >+ spi-tx-bus-width = <4>;
> >+ spi-rx-bus-width = <4>;
> >+ m25p,fast-read;
> >+
> >+ partition@0 {
> >+ label = "loader_prg";
> >+ reg = <0x00000000 0x00040000>;
> >+ read-only;
> >+ };
> >+ partition@40000 {
> >+ label = "user_prg";
> >+ reg = <0x00040000 0x00400000>;
> >+ read-only;
>
> Oops, there shouldn't be "read-only" here, I forgot to refresh
> the patch as I'm now seeing... too bad it's too late to resend now.
> :-(
Could you send an incremental fix for me to queue up?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
