Re: [PATCH 3/3] watchdog: da9062: add power management ops

[Guenter Roeck <linux@xxxxxxxxxxxx>]

On 2/6/20 1:00 AM, Marco Felsch wrote:
> Hi Guenter,
>
> On 20-01-23 12:51, Guenter Roeck wrote:
> > On Wed, Jan 08, 2020 at 10:57:04AM +0100, Marco Felsch wrote:
> > > Disable the watchdog during suspend if it is enabled and re-enable it on
> > > resume. So we can sleep without the interruptions.
> > >
> > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> > > Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
> >
> > Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
>
> I got an kbuild email so I checked the linux-next master tree. On
> linux-next this patch isn't used instead the old v1 was used...

FWIW, The subject line of this patch doesn't include "v2".

Guenter

> Regards,
>    Marco
>
> > > ---
> > > v2:
> > > - add dlg,use-sw-pm check to differentiate between automatic and manual
> > >    disabling/enabling.
> > > ---
> > >   drivers/watchdog/da9062_wdt.c | 37 +++++++++++++++++++++++++++++++++++
> > >   1 file changed, 37 insertions(+)
> > >
> > > diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
> > > index e149e66a6ea9..c9b9d6394525 100644
> > > --- a/drivers/watchdog/da9062_wdt.c
> > > +++ b/drivers/watchdog/da9062_wdt.c
> > > @@ -15,6 +15,7 @@
> > >   #include <linux/jiffies.h>
> > >   #include <linux/mfd/da9062/registers.h>
> > >   #include <linux/mfd/da9062/core.h>
> > > +#include <linux/property.h>
> > >   #include <linux/regmap.h>
> > >   #include <linux/of.h>
> > >   
> > > @@ -30,6 +31,7 @@ static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
> > >   struct da9062_watchdog {
> > >   	struct da9062 *hw;
> > >   	struct watchdog_device wdtdev;
> > > +	bool use_sw_pm;
> > >   };
> > >   
> > >   static unsigned int da9062_wdt_timeout_to_sel(unsigned int secs)
> > > @@ -198,6 +200,8 @@ static int da9062_wdt_probe(struct platform_device *pdev)
> > >   	if (!wdt)
> > >   		return -ENOMEM;
> > >   
> > > +	wdt->use_sw_pm = device_property_present(dev, "dlg,use-sw-pm");
> > > +
> > >   	wdt->hw = chip;
> > >   
> > >   	wdt->wdtdev.info = &da9062_watchdog_info;
> > > @@ -212,6 +216,7 @@ static int da9062_wdt_probe(struct platform_device *pdev)
> > >   	watchdog_set_restart_priority(&wdt->wdtdev, 128);
> > >   
> > >   	watchdog_set_drvdata(&wdt->wdtdev, wdt);
> > > +	dev_set_drvdata(dev, &wdt->wdtdev);
> > >   
> > >   	ret = devm_watchdog_register_device(dev, &wdt->wdtdev);
> > >   	if (ret < 0)
> > > @@ -220,10 +225,42 @@ static int da9062_wdt_probe(struct platform_device *pdev)
> > >   	return da9062_wdt_ping(&wdt->wdtdev);
> > >   }
> > >   
> > > +static int __maybe_unused da9062_wdt_suspend(struct device *dev)
> > > +{
> > > +	struct watchdog_device *wdd = dev_get_drvdata(dev);
> > > +	struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
> > > +
> > > +	if (!wdt->use_sw_pm)
> > > +		return 0;
> > > +
> > > +	if (watchdog_active(wdd))
> > > +		return da9062_wdt_stop(wdd);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int __maybe_unused da9062_wdt_resume(struct device *dev)
> > > +{
> > > +	struct watchdog_device *wdd = dev_get_drvdata(dev);
> > > +	struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
> > > +
> > > +	if (!wdt->use_sw_pm)
> > > +		return 0;
> > > +
> > > +	if (watchdog_active(wdd))
> > > +		return da9062_wdt_start(wdd);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static SIMPLE_DEV_PM_OPS(da9062_wdt_pm_ops,
> > > +			 da9062_wdt_suspend, da9062_wdt_resume);
> > > +
> > >   static struct platform_driver da9062_wdt_driver = {
> > >   	.probe = da9062_wdt_probe,
> > >   	.driver = {
> > >   		.name = "da9062-watchdog",
> > > +		.pm = &da9062_wdt_pm_ops,
> > >   		.of_match_table = da9062_compatible_id_table,
> > >   	},
> > >   };