RE: [PATCHv9 08/12] PCI: mobiveil: Add 8-bit and 16-bit CSR register accessors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrew,

Thanks a lot for your comments!

> -----Original Message-----
> From: Andrew Murray <andrew.murray@xxxxxxx>
> Sent: 2020年1月13日 19:32
> To: Z.q. Hou <zhiqiang.hou@xxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx; arnd@xxxxxxxx;
> mark.rutland@xxxxxxx; l.subrahmanya@xxxxxxxxxxxxxx;
> shawnguo@xxxxxxxxxx; m.karthikeyan@xxxxxxxxxxxxxx; Leo Li
> <leoyang.li@xxxxxxx>; lorenzo.pieralisi@xxxxxxx;
> catalin.marinas@xxxxxxx; will.deacon@xxxxxxx; Mingkai Hu
> <mingkai.hu@xxxxxxx>; M.h. Lian <minghuan.lian@xxxxxxx>; Xiaowei Bao
> <xiaowei.bao@xxxxxxx>
> Subject: Re: [PATCHv9 08/12] PCI: mobiveil: Add 8-bit and 16-bit CSR register
> accessors
> 
> On Wed, Nov 20, 2019 at 03:46:10AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > There are some 8-bit and 16-bit registers in PCIe configuration space,
> > so add these accessors accordingly.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> > Reviewed-by: Minghuan Lian <Minghuan.Lian@xxxxxxx>
> > Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx>
> > ---
> > V9:
> >  - No change
> >
> >  .../pci/controller/mobiveil/pcie-mobiveil.h   | 23
> +++++++++++++++++++
> >  1 file changed, 23 insertions(+)
> >
> > diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > index 37116c2a19fe..750a7fd95bc1 100644
> > --- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > +++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
> > @@ -182,10 +182,33 @@ static inline u32 mobiveil_csr_readl(struct
> mobiveil_pcie *pcie, u32 off)
> >  	return mobiveil_csr_read(pcie, off, 0x4);  }
> >
> > +static inline u32 mobiveil_csr_readw(struct mobiveil_pcie *pcie, u32
> > +off) {
> > +	return mobiveil_csr_read(pcie, off, 0x2); }
> > +
> > +static inline u32 mobiveil_csr_readb(struct mobiveil_pcie *pcie, u32
> > +off) {
> > +	return mobiveil_csr_read(pcie, off, 0x1); }
> 
> Do you think the above two return types should reflect the size of the access?

Will change in v10.

Thanks,
Zhiqiang

> 
> Thanks,
> 
> Andrew Murray
> 
> > +
> > +
> >  static inline void mobiveil_csr_writel(struct mobiveil_pcie *pcie, u32 val,
> >  				       u32 off)
> >  {
> >  	mobiveil_csr_write(pcie, val, off, 0x4);  }
> >
> > +static inline void mobiveil_csr_writew(struct mobiveil_pcie *pcie, u32 val,
> > +				       u32 off)
> > +{
> > +	mobiveil_csr_write(pcie, val, off, 0x2); }
> > +
> > +static inline void mobiveil_csr_writeb(struct mobiveil_pcie *pcie, u32 val,
> > +				       u32 off)
> > +{
> > +	mobiveil_csr_write(pcie, val, off, 0x1); }
> > +
> >  #endif /* _PCIE_MOBIVEIL_H */
> > --
> > 2.17.1
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux