[PATCH 5/5] ARM: dts: sun7i: Add Linutronix Testbox v2 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bastian Germann <bage@xxxxxxxxxxxxx>

The Testbox board is an open hardware enhancement for the Lamobo R1 router
board.  The Testbox board is used in the CI-RT project to manage devices
under test (https://ci-rt.linutronix.de).

The hardware project is located at https://github.com/ci-rt/testbox-shield

The Testbox v2 expands the Lamobo R1 router board with
- a power supply,
- a CAN bus PHY,
- a power control,
- a relay,
- a I2C EEPROM,
- a secure key storage (ATECC608a) and
- two RS232 compliant serial ports.

Co-developed-by: Benedikt Spranger <b.spranger@xxxxxxxxxxxxx>
Signed-off-by: Benedikt Spranger <b.spranger@xxxxxxxxxxxxx>
Signed-off-by: Bastian Germann <bage@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/Makefile                    |  1 +
 arch/arm/boot/dts/sun7i-a20-lx-testbox-v2.dts | 65 +++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-lx-testbox-v2.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08011dc8c7a6..383541842695 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1069,6 +1069,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-icnova-swac.dtb \
 	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-lx-testbox-v2.dtb \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-lx-testbox-v2.dts b/arch/arm/boot/dts/sun7i-a20-lx-testbox-v2.dts
new file mode 100644
index 000000000000..3b91fb026a92
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-lx-testbox-v2.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@xxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1-common.dtsi"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "lx,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_lamobo_r1>;
+
+		led-green {
+			label = "lamobo_r1:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&pio {
+	led_pins_lamobo_r1: led-pins {
+		pins = "PH3", "PH5", "PH24";
+		function = "gpio_out";
+		drive-strength = <40>;
+		bias-disable;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux