Re: [PATCH v4 8/8] arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Sandeep Maheswaram (2020-01-29 05:51:59)
> Overriding the QUSB2 V2 Phy tuning parameters for SC7180 IDP device.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 388f50a..826cf02 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -276,9 +276,11 @@
>         vdda-pll-supply = <&vreg_l11a_1p8>;
>         vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
>         qcom,imp-res-offset-value = <8>;
> -       qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
> -       qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
> +       qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
>         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
> +       qcom,bias-ctrl-value = <0x22>;
> +       qcom,charge-ctrl-value = <3>;
> +       qcom,hsdisc-trim-value = <0>;

Actually, I'd prefer it uses /bits/ 8 here if it's just 8 bits.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux