Re: [PATCH 9/9] iio: imu: inv_mpu6050: fix LPF bandwidth setting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 20 Jan 2020 10:36:20 +0100
Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx> wrote:

> As every chip has some little variant in LPF bandwidth values,
> use common values that are working for all chips.
> Simplify the LPF setting function.
> 
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
hmm. On this one I wonder if the 'fix' title is strictly accurate.
It's certainly a good thing to have, but I'm not sure if we will
want to backport it.  If you do, then break it out of this series
as a separate fix and add appropriate fixes tag.

All the other patches I haven't commented on in this series look fine
to me subject to Rob's suggestion of combining the dt ID additions for
the binding doc into one patch.

Thanks,

Jonathan

> ---
>  drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 30 ++++++++++++----------
>  drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  | 10 ++++----
>  2 files changed, 21 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 9ecc667debbe..c4db9086775c 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -707,30 +707,32 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev,
>  /**
>   *  inv_mpu6050_set_lpf() - set low pass filer based on fifo rate.
>   *
> - *                  Based on the Nyquist principle, the sampling rate must
> - *                  exceed twice of the bandwidth of the signal, or there
> - *                  would be alising. This function basically search for the
> - *                  correct low pass parameters based on the fifo rate, e.g,
> - *                  sampling frequency.
> + *                  Based on the Nyquist principle, the bandwidth of the low
> + *                  pass filter must not exceed the signal sampling rate divided
> + *                  by 2, or there would be aliasing.
> + *                  This function basically search for the correct low pass
> + *                  parameters based on the fifo rate, e.g, sampling frequency.
>   *
>   *  lpf is set automatically when setting sampling rate to avoid any aliases.
>   */
>  static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
>  {
> -	static const int hz[] = {188, 98, 42, 20, 10, 5};
> +	static const int hz[] = {400, 200, 90, 40, 20, 10};
>  	static const int d[] = {
> -		INV_MPU6050_FILTER_188HZ, INV_MPU6050_FILTER_98HZ,
> -		INV_MPU6050_FILTER_42HZ, INV_MPU6050_FILTER_20HZ,
> +		INV_MPU6050_FILTER_200HZ, INV_MPU6050_FILTER_100HZ,
> +		INV_MPU6050_FILTER_45HZ, INV_MPU6050_FILTER_20HZ,
>  		INV_MPU6050_FILTER_10HZ, INV_MPU6050_FILTER_5HZ
>  	};
> -	int i, h, result;
> +	int i, result;
>  	u8 data;
>  
> -	h = (rate >> 1);
> -	i = 0;
> -	while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1))
> -		i++;
> -	data = d[i];
> +	data = INV_MPU6050_FILTER_5HZ;
> +	for (i = 0; i < ARRAY_SIZE(hz); ++i) {
> +		if (rate >= hz[i]) {
> +			data = d[i];
> +			break;
> +		}
> +	}
>  	result = inv_mpu6050_set_lpf_regs(st, data);
>  	if (result)
>  		return result;
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> index 7ae614052210..9a81098a8b4d 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> @@ -370,14 +370,14 @@ enum inv_mpu6050_scan {
>  };
>  
>  enum inv_mpu6050_filter_e {
> -	INV_MPU6050_FILTER_256HZ_NOLPF2 = 0,
> -	INV_MPU6050_FILTER_188HZ,
> -	INV_MPU6050_FILTER_98HZ,
> -	INV_MPU6050_FILTER_42HZ,
> +	INV_MPU6050_FILTER_NOLPF2 = 0,
> +	INV_MPU6050_FILTER_200HZ,
> +	INV_MPU6050_FILTER_100HZ,
> +	INV_MPU6050_FILTER_45HZ,
>  	INV_MPU6050_FILTER_20HZ,
>  	INV_MPU6050_FILTER_10HZ,
>  	INV_MPU6050_FILTER_5HZ,
> -	INV_MPU6050_FILTER_2100HZ_NOLPF,
> +	INV_MPU6050_FILTER_NOLPF,
>  	NUM_MPU6050_FILTER
>  };
>  




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux