On Mon, 27 Jan 2020 at 22:55, <lukasz.luba@xxxxxxx> wrote: > > From: Lukasz Luba <lukasz.luba@xxxxxxx> > > Add dynamic power coefficient into CPU nodes which let CPUFreq subsystem > register the Energy Model (EM) for the CPUs. > > The 'dynamic-power-coefficient' is used for calculating the dynamic power > according to the equation in documentation [1]. The Energy Model (EM) > framework relies on calculated power and cost for each OPP. The OPP power > values come from CPUFreq driver, which registered required callback > function. The simple implementation of a CPUFREQ driver, like cpufreq-dt, > uses 'dev_pm_opp_of_register_em()' which relay on > 'dynamic-power-coefficient' to calculate the power of requested OPP for the > EM [2]. > > The calculated values might be checked in > /sys/kernel/debug/energy_model/pd*/ > > $ grep . /sys/kernel/debug/energy_model/pd1/cs*/* > /sys/kernel/debug/energy_model/pd1/cs:1000000/cost:558 > /sys/kernel/debug/energy_model/pd1/cs:1000000/frequency:1000000 > /sys/kernel/debug/energy_model/pd1/cs:1000000/power:310 > /sys/kernel/debug/energy_model/pd1/cs:1100000/cost:558 > /sys/kernel/debug/energy_model/pd1/cs:1100000/frequency:1100000 > /sys/kernel/debug/energy_model/pd1/cs:1100000/power:341 > /sys/kernel/debug/energy_model/pd1/cs:1200000/cost:558 > /sys/kernel/debug/energy_model/pd1/cs:1200000/frequency:1200000 > /sys/kernel/debug/energy_model/pd1/cs:1200000/power:372 > /sys/kernel/debug/energy_model/pd1/cs:1300000/cost:674 > /sys/kernel/debug/energy_model/pd1/cs:1300000/frequency:1300000 > /sys/kernel/debug/energy_model/pd1/cs:1300000/power:487 > /sys/kernel/debug/energy_model/pd1/cs:1400000/cost:675 ... > > $ grep . /sys/kernel/debug/energy_model/pd0/cs*/* > /sys/kernel/debug/energy_model/pd0/cs:1000000/cost:200 > /sys/kernel/debug/energy_model/pd0/cs:1000000/frequency:1000000 > /sys/kernel/debug/energy_model/pd0/cs:1000000/power:154 > /sys/kernel/debug/energy_model/pd0/cs:1100000/cost:260 > /sys/kernel/debug/energy_model/pd0/cs:1100000/frequency:1100000 > /sys/kernel/debug/energy_model/pd0/cs:1100000/power:220 > /sys/kernel/debug/energy_model/pd0/cs:1200000/cost:260 > /sys/kernel/debug/energy_model/pd0/cs:1200000/frequency:1200000 > /sys/kernel/debug/energy_model/pd0/cs:1200000/power:240 > /sys/kernel/debug/energy_model/pd0/cs:1300000/cost:260 > /sys/kernel/debug/energy_model/pd0/cs:1300000/frequency:1300000 > /sys/kernel/debug/energy_model/pd0/cs:1300000/power:260 > /sys/kernel/debug/energy_model/pd0/cs:200000/cost:130 ... Please, do not describe entire Energy Model in commit message touching DTS. It brings too much information which look unrelated and therefore it makes difficult to spot real rationale behind the change. Just mention: 1. Why you are doing it? 2. What are you doing? 3. How did you figure out magic constants here (details of "what")? > To provide a proper value of the 'dynamic-power-coefficient' the real power > can be measured using a dedicated hardware, i.e. INA2xx. The Odroid-XU3 > hwmon sensors have been used to capture the power value during a sysbench > test running on single core and at each possible OPP. Since you mention the values, post them. That's the only thing which reader cannot get on his own. All other values posted in commit message will be seen after running tests... > The measured values > were divided by 2, since the dynamic power is typically half of the > consumed power (the second half is static power). Next, the approximation > was made and the power model derived, showing the 'C' value of routhly X. s/routhly/roughly/ What is X? > Check the example equations in drivers/opp/of.c [2]. > Thus, i.e. the power = 1.0Watt at 1GHz => 0.5W dynamic power => > dynamic-power-coefficient = 400 > > Using this simple technique we can provide and needed coefficient. The s/and/the/ ? > approximation does not have to be super precised. The proportion is > important and the difference between power consumed by different CPUs > running at the same frequency, which is then used in Energy Aware Scheduler > algorithms. An example power values on Odroid-XU3: > > (LITTLE CPU) > /sys/kernel/debug/energy_model/pd0/cs:1000000/frequency:1000000 > /sys/kernel/debug/energy_model/pd0/cs:1000000/power:154 For A7, 1V and 1 GHz this gives 142, not 154. Is it correct? What ASV are you using? > (big CPU) > /sys/kernel/debug/energy_model/pd1/cs:1000000/frequency:1000000 > /sys/kernel/debug/energy_model/pd1/cs:1000000/power:310 > > In Odroid-XU3 case the derived coefficient value for 'big' CPU has: > dynamic-power-coefficient = <310>; > while the 'LITTLE': > dynamic-power-coefficient = <128>; Make it all compact. First, you mention power values which are the same as in the beginning of this commit message. Why repeating? Then you mention the power coefficient in 4 lines instead of simple: For Odroid XU3, the derived power coefficient is then 128 for an A7 CPU and 310 for an A15 CPU. Or something similar. > > [1] Documentation/devicetree/bindings/arm/cpus.yaml > [2] https://elixir.bootlin.com/linux/v5.4/source/drivers/opp/of.c#L1044 Refer to path inside, no external sources unless needed. Best regards, Krzysztof > > Signed-off-by: Lukasz Luba <lukasz.luba@xxxxxxx> > --- > arch/arm/boot/dts/exynos5422-cpus.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi > index 1b8605cf2407..c9a0dc99d2fb 100644 > --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi > +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi > @@ -31,6 +31,7 @@ > operating-points-v2 = <&cluster_a7_opp_table>; > #cooling-cells = <2>; /* min followed by max */ > capacity-dmips-mhz = <539>; > + dynamic-power-coefficient = <128>; > }; > > cpu1: cpu@101 { > @@ -43,6 +44,7 @@ > operating-points-v2 = <&cluster_a7_opp_table>; > #cooling-cells = <2>; /* min followed by max */ > capacity-dmips-mhz = <539>; > + dynamic-power-coefficient = <128>; > }; > > cpu2: cpu@102 { > @@ -55,6 +57,7 @@ > operating-points-v2 = <&cluster_a7_opp_table>; > #cooling-cells = <2>; /* min followed by max */ > capacity-dmips-mhz = <539>; > + dynamic-power-coefficient = <128>; > }; > > cpu3: cpu@103 { > @@ -67,6 +70,7 @@ > operating-points-v2 = <&cluster_a7_opp_table>; > #cooling-cells = <2>; /* min followed by max */ > capacity-dmips-mhz = <539>; > + dynamic-power-coefficient = <128>; > }; > > cpu4: cpu@0 { > @@ -79,6 +83,7 @@ > operating-points-v2 = <&cluster_a15_opp_table>; > #cooling-cells = <2>; /* min followed by max */ > capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <310>; > }; > > cpu5: cpu@1 { > @@ -91,6 +96,7 @@ > operating-points-v2 = <&cluster_a15_opp_table>; > #cooling-cells = <2>; /* min followed by max */ > capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <310>; > }; > > cpu6: cpu@2 { > @@ -103,6 +109,7 @@ > operating-points-v2 = <&cluster_a15_opp_table>; > #cooling-cells = <2>; /* min followed by max */ > capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <310>; > }; > > cpu7: cpu@3 { > @@ -115,6 +122,7 @@ > operating-points-v2 = <&cluster_a15_opp_table>; > #cooling-cells = <2>; /* min followed by max */ > capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <310>; > }; > }; > }; > -- > 2.17.1 >
