From: Michael Srba <Michael.Srba@xxxxxxxxx>
Signed-off-by: Michael Srba <Michael.Srba@xxxxxxxxx>
---
Changes since v1: reorder includes; remove empty functions; fix after rebasing
---
drivers/gpu/drm/panel/Kconfig | 6 +
drivers/gpu/drm/panel/Makefile | 1 +
.../panel/panel-samsung-s6e88a0-ams452ef01.c | 289 ++++++++++++++++++
3 files changed, 296 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index ae44ac2ec106..0c7d61f32b0e 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -275,6 +275,12 @@ config DRM_PANEL_SAMSUNG_S6E63M0
Say Y here if you want to enable support for Samsung S6E63M0
AMOLED LCD panel.
+config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
+ tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
+ depends on OF
+ select DRM_MIPI_DSI
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SAMSUNG_S6E8AA0
tristate "Samsung S6E8AA0 DSI video mode panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 7c4d3c581fd4..5b622fbe4014 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01) += panel-samsung-s6e88a0-ams452ef01.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
new file mode 100644
index 000000000000..49d3f6d0f137
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2019, Michael Srba
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct s6e88a0_ams452ef01 {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+ struct regulator_bulk_data supplies[2];
+ struct gpio_desc *reset_gpio;
+
+ bool prepared;
+};
+
+static inline struct s6e88a0_ams452ef01 *to_s6e88a0_ams452ef01(struct drm_panel *panel)
+{
+ return container_of(panel, struct s6e88a0_ams452ef01, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, seq...) do { \
+ static const u8 d[] = { seq }; \
+ int ret; \
+ ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+static void s6e88a0_ams452ef01_reset(struct s6e88a0_ams452ef01 *ctx)
+{
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(1000, 2000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(10000, 11000);
+}
+
+static int s6e88a0_ams452ef01_on(struct s6e88a0_ams452ef01 *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); // enable LEVEL2 commands
+ dsi_dcs_write_seq(dsi, 0xcc, 0x4c); // set Pixel Clock Divider polarity
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(120);
+
+ // set default brightness/gama
+ dsi_dcs_write_seq(dsi, 0xca,
+ 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, // V255 RR,GG,BB
+ 0x80, 0x80, 0x80, // V203 R,G,B
+ 0x80, 0x80, 0x80, // V151 R,G,B
+ 0x80, 0x80, 0x80, // V87 R,G,B
+ 0x80, 0x80, 0x80, // V51 R,G,B
+ 0x80, 0x80, 0x80, // V35 R,G,B
+ 0x80, 0x80, 0x80, // V23 R,G,B
+ 0x80, 0x80, 0x80, // V11 R,G,B
+ 0x6b, 0x68, 0x71, // V3 R,G,B
+ 0x00, 0x00, 0x00); // V1 R,G,B
+ dsi_dcs_write_seq(dsi, 0xb2, 0x40, 0x0a, 0x17, 0x00, 0x0a); // set default Amoled Off Ratio
+ dsi_dcs_write_seq(dsi, 0xb6, 0x2c, 0x0b); // set default elvss voltage
+ dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+ dsi_dcs_write_seq(dsi, 0xf7, 0x03); // gamma/aor update
+ dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); // disable LEVEL2 commands
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display on: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int s6e88a0_ams452ef01_off(struct s6e88a0_ams452ef01 *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display off: %d\n", ret);
+ return ret;
+ }
+ msleep(35);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(120);
+
+ return 0;
+}
+
+static int s6e88a0_ams452ef01_prepare(struct drm_panel *panel)
+{
+ struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel);
+ struct device *dev = &ctx->dsi->dev;
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enable regulators: %d\n", ret);
+ return ret;
+ }
+
+ s6e88a0_ams452ef01_reset(ctx);
+
+ ret = s6e88a0_ams452ef01_on(ctx);
+ if (ret < 0) {
+ dev_err(dev, "Failed to initialize panel: %d\n", ret);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ return ret;
+ }
+
+ ctx->prepared = true;
+ return 0;
+}
+
+static int s6e88a0_ams452ef01_unprepare(struct drm_panel *panel)
+{
+ struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel);
+ struct device *dev = &ctx->dsi->dev;
+ int ret;
+
+ if (!ctx->prepared)
+ return 0;
+
+ ret = s6e88a0_ams452ef01_off(ctx);
+ if (ret < 0)
+ dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+ ctx->prepared = false;
+ return 0;
+}
+
+static const struct drm_display_mode s6e88a0_ams452ef01_mode = {
+ .clock = (540 + 88 + 4 + 20) * (960 + 14 + 2 + 8) * 60 / 1000,
+ .hdisplay = 540,
+ .hsync_start = 540 + 88,
+ .hsync_end = 540 + 88 + 4,
+ .htotal = 540 + 88 + 4 + 20,
+ .vdisplay = 960,
+ .vsync_start = 960 + 14,
+ .vsync_end = 960 + 14 + 2,
+ .vtotal = 960 + 14 + 2 + 8,
+ .vrefresh = 60,
+ .width_mm = 56,
+ .height_mm = 100,
+};
+
+static int s6e88a0_ams452ef01_get_modes(struct drm_panel *panel, struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &s6e88a0_ams452ef01_mode);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs s6e88a0_ams452ef01_panel_funcs = {
+ .unprepare = s6e88a0_ams452ef01_unprepare,
+ .prepare = s6e88a0_ams452ef01_prepare,
+ .get_modes = s6e88a0_ams452ef01_get_modes,
+};
+
+static int s6e88a0_ams452ef01_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct s6e88a0_ams452ef01 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->supplies[0].supply = "vdd3";
+ ctx->supplies[1].supply = "vci";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get regulators: %d\n", ret);
+ return ret;
+ }
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ ret = PTR_ERR(ctx->reset_gpio);
+ dev_err(dev, "Failed to get reset-gpios: %d\n", ret);
+ return ret;
+ }
+
+ ctx->dsi = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ dsi->lanes = 2;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST;
+
+ drm_panel_init(&ctx->panel, dev, &s6e88a0_ams452ef01_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_add(&ctx->panel);
+ if (ret < 0) {
+ dev_err(dev, "Failed to add panel: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int s6e88a0_ams452ef01_remove(struct mipi_dsi_device *dsi)
+{
+ struct s6e88a0_ams452ef01 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->panel);
+
+ return 0;
+}
+
+static const struct of_device_id s6e88a0_ams452ef01_of_match[] = {
+ { .compatible = "samsung,s6e88a0-ams452ef01" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, s6e88a0_ams452ef01_of_match);
+
+static struct mipi_dsi_driver s6e88a0_ams452ef01_driver = {
+ .probe = s6e88a0_ams452ef01_probe,
+ .remove = s6e88a0_ams452ef01_remove,
+ .driver = {
+ .name = "panel-s6e88a0-ams452ef01",
+ .of_match_table = s6e88a0_ams452ef01_of_match,
+ },
+};
+module_mipi_dsi_driver(s6e88a0_ams452ef01_driver);
+
+MODULE_AUTHOR("Michael Srba <Michael.Srba@xxxxxxxxx>");
+MODULE_DESCRIPTION("MIPI-DSI based Panel Driver for AMS452EF01 AMOLED LCD with a S6E88A0 controller");
+MODULE_LICENSE("GPL v2");
--
2.24.0
