[PATCH] dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The 'qcom,gcc.yaml' file failed self-validation (dt_binding_check)
because it required a property to be either (3 entries big),
(3 entries big), or (7 entries big), but not more than one of those
things.  That didn't make a ton of sense.

This patch splits all of the exceptional device trees (AKA those that
would have needed if/then/else rules) from qcom,gcc.yaml.  It also
cleans up some cruft found while doing that.

After this lands, this worked for me atop clk-next:
  for f in \
    Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml \
    Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml \
    Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml \
    Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml \
    Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml \
    Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml \
    Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml \
    Documentation/devicetree/bindings/clock/qcom,gcc.yaml; do \
      ARCH=arm64 make dt_binding_check DT_SCHEMA_FILES=$f; \
      ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=$f; \
  done

Arbitrary decisions made (yell if you want changed):
- Left all the older devices (where clocks / clock-names weren't
  specified) in a single file.
- Didn't make clocks "required" for msm8996/msm8998 but left them as
  listed.  This seems a little weird but means I didn't need to open a
  whole different can of worms.  It matches the old binding for
  msm8996 and doesn't match the binding (but matches the dts) for
  msm8998.

Misc cleanups as part of this patch:
- sm8150 was claimed to be same set of clocks as sc7180, but driver
  and dts appear to say that "bi_tcxo_ao" doesn't exist.  Fixed.
- In "apq8064", "#thermal-sensor-cells" was missing the "#".
- Got rid of "|" at the end of top description since spacing doesn't
  matter.
- Changed indentation to consistently 2 spaces (it was 3 in some
  places).
- Added period at the end of protected-clocks description.
- No space before ":".
- Updated sc7180/sm8150 example to use the 'qcom,rpmh.h' include.
- Updated sc7180/sm8150 example to use larger address/size cells as
  per reality.
- Updated sc7180/sm8150 example to point to the sleep_clk rather than
  <0>.
- Made it so that gcc-ipq8074 didn't require #power-domain-cells since
  actual dts didn't have it and I got no hits from:
    git grep _GDSC include/dt-bindings/clock/qcom,gcc-ipq8074.h
- Made it so that gcc-qcs404 didn't require #power-domain-cells since
  actual dts didn't have it and I got no hits from:
    git grep _GDSC include/dt-bindings/clock/qcom,gcc-qcs404.h

Noticed, but not done in this patch (volunteers needed):
- Add "aud_ref_clk" to sm8150 bindings / dts even though I found a
  reference to it in "gcc-sm8150.c".
- Fix node name in actual ipq8074 to be "clock-controller" (it's gcc).
- Since the example doesn't need phandes to exist, in msm8998 could
  just make up places providing some of the clocks currently bogused
  out with <0>.

Fixes: ab91f72e018a ("clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks")
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

 .../bindings/clock/qcom,gcc-apq8064.yaml      |  81 +++++++
 .../bindings/clock/qcom,gcc-ipq8074.yaml      |  48 ++++
 .../bindings/clock/qcom,gcc-msm8996.yaml      |  65 ++++++
 .../bindings/clock/qcom,gcc-msm8998.yaml      |  88 ++++++++
 .../bindings/clock/qcom,gcc-qcs404.yaml       |  48 ++++
 .../bindings/clock/qcom,gcc-sc7180.yaml       |  72 ++++++
 .../bindings/clock/qcom,gcc-sm8150.yaml       |  69 ++++++
 .../devicetree/bindings/clock/qcom,gcc.yaml   | 212 ++----------------
 8 files changed, 489 insertions(+), 194 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
new file mode 100644
index 000000000000..c09497881cd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-apq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+
+maintainers:
+  - Stephen Boyd <sboyd@xxxxxxxxxx>
+  - Taniya Das <tdas@xxxxxxxxxxxxxx>
+
+description:
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on APQ8064.
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8064
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    minItems: 1
+    maxItems: 2
+    description:
+      Qualcomm TSENS (thermal sensor device) on some devices can
+      be part of GCC and hence the TSENS properties can also be part
+      of the GCC/clock-controller node.
+      For more details on the TSENS properties please refer
+      Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+
+  nvmem-cell-names:
+    minItems: 1
+    maxItems: 2
+    description:
+      Names for each nvmem-cells specified.
+    items:
+      - const: calib
+      - const: calib_backup
+
+  '#thermal-sensor-cells':
+    const: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+  - nvmem-cells
+  - nvmem-cell-names
+  - '#thermal-sensor-cells'
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-apq8064";
+      reg = <0x00900000 0x4000>;
+      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+      nvmem-cell-names = "calib", "calib_backup";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      #thermal-sensor-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
new file mode 100644
index 000000000000..1c6461c52a47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-ipq8074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074
+
+maintainers:
+  - Stephen Boyd <sboyd@xxxxxxxxxx>
+  - Taniya Das <tdas@xxxxxxxxxxxxxx>
+
+description:
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on IPQ8074.
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq8074
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq8074";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
new file mode 100644
index 000000000000..32782e648c7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8996
+
+maintainers:
+  - Stephen Boyd <sboyd@xxxxxxxxxx>
+  - Taniya Das <tdas@xxxxxxxxxxxxxx>
+
+description:
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8996.
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8996
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Second XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: cxo2
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8996";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
new file mode 100644
index 000000000000..75c0ee208965
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8998
+
+maintainers:
+  - Stephen Boyd <sboyd@xxxxxxxxxx>
+  - Taniya Das <tdas@xxxxxxxxxxxxxx>
+
+description:
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8998.
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8998
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: USB 3.0 phy pipe clock
+      - description: UFS phy rx symbol clock for pipe 0
+      - description: UFS phy rx symbol clock for pipe 1
+      - description: UFS phy tx symbol clock
+      - description: PCIE phy pipe clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: usb3_pipe
+      - const: ufs_rx_symbol0
+      - const: ufs_rx_symbol1
+      - const: ufs_tx_symbol0
+      - const: pcie0_pipe
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-msm8998";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x00100000 0xb0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep>,
+               <0>,
+               <0>,
+               <0>,
+               <0>,
+               <0>;
+      clock-names = "xo",
+                    "sleep_clk",
+                    "usb3_pipe",
+                    "ufs_rx_symbol0",
+                    "ufs_rx_symbol1",
+                    "ufs_tx_symbol0",
+                    "pcie0_pipe";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
new file mode 100644
index 000000000000..f881cbeab594
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-qcs404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404
+
+maintainers:
+  - Stephen Boyd <sboyd@xxxxxxxxxx>
+  - Taniya Das <tdas@xxxxxxxxxxxxxx>
+
+description:
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on QCS404.
+
+properties:
+  compatible:
+    const: qcom,gcc-qcs404
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-qcs404";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
new file mode 100644
index 000000000000..b6a27da0c9b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC7180
+
+maintainers:
+  - Stephen Boyd <sboyd@xxxxxxxxxx>
+  - Taniya Das <tdas@xxxxxxxxxxxxxx>
+
+description:
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SC7180.
+
+properties:
+  compatible:
+    const: qcom,gcc-sc7180
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc7180";
+      reg = <0 0x00100000 0 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
new file mode 100644
index 000000000000..ca581b2e3286
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8150
+
+maintainers:
+  - Stephen Boyd <sboyd@xxxxxxxxxx>
+  - Taniya Das <tdas@xxxxxxxxxxxxxx>
+
+description:
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM8150.
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8150
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8150";
+      reg = <0 0x00100000 0 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index cac1150c9292..a891e5a37369 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -10,81 +10,28 @@ maintainers:
   - Stephen Boyd <sboyd@xxxxxxxxxx>
   - Taniya Das <tdas@xxxxxxxxxxxxxx>
 
-description: |
+description:
   Qualcomm global clock control module which supports the clocks, resets and
   power domains.
 
 properties:
-  compatible :
+  compatible:
     enum:
-       - qcom,gcc-apq8064
-       - qcom,gcc-apq8084
-       - qcom,gcc-ipq4019
-       - qcom,gcc-ipq6018
-       - qcom,gcc-ipq8064
-       - qcom,gcc-ipq8074
-       - qcom,gcc-msm8660
-       - qcom,gcc-msm8916
-       - qcom,gcc-msm8960
-       - qcom,gcc-msm8974
-       - qcom,gcc-msm8974pro
-       - qcom,gcc-msm8974pro-ac
-       - qcom,gcc-msm8994
-       - qcom,gcc-msm8996
-       - qcom,gcc-msm8998
-       - qcom,gcc-mdm9615
-       - qcom,gcc-qcs404
-       - qcom,gcc-sc7180
-       - qcom,gcc-sdm630
-       - qcom,gcc-sdm660
-       - qcom,gcc-sdm845
-       - qcom,gcc-sm8150
-
-  clocks:
-    oneOf:
-      #qcom,gcc-sm8150
-      #qcom,gcc-sc7180
-      - items:
-        - description: Board XO source
-        - description: Board active XO source
-        - description: Sleep clock source
-      #qcom,gcc-msm8996
-      - items:
-        - description: XO source
-        - description: Second XO source
-        - description: Sleep clock source
-      #qcom,gcc-msm8998
-      - items:
-        - description: Board XO source
-        - description: Sleep clock source
-        - description: USB 3.0 phy pipe clock
-        - description: UFS phy rx symbol clock for pipe 0
-        - description: UFS phy rx symbol clock for pipe 1
-        - description: UFS phy tx symbol clock
-        - description: PCIE phy pipe clock
-
-  clock-names:
-    oneOf:
-      #qcom,gcc-sm8150
-      #qcom,gcc-sc7180
-      - items:
-        - const: bi_tcxo
-        - const: bi_tcxo_ao
-        - const: sleep_clk
-      #qcom,gcc-msm8996
-      - items:
-        - const: cxo
-        - const: cxo2
-        - const: sleep_clk
-      #qcom,gcc-msm8998
-      - items:
-        - const: xo
-        - const: sleep_clk
-        - const: usb3_pipe
-        - const: ufs_rx_symbol0
-        - const: ufs_rx_symbol1
-        - const: ufs_tx_symbol0
-        - const: pcie0_pipe
+      - qcom,gcc-apq8084
+      - qcom,gcc-ipq4019
+      - qcom,gcc-ipq6018
+      - qcom,gcc-ipq8064
+      - qcom,gcc-msm8660
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8960
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+      - qcom,gcc-msm8994
+      - qcom,gcc-mdm9615
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+      - qcom,gcc-sdm845
 
   '#clock-cells':
     const: 1
@@ -98,31 +45,9 @@ properties:
   reg:
     maxItems: 1
 
-  nvmem-cells:
-    minItems: 1
-    maxItems: 2
-    description:
-      Qualcomm TSENS (thermal sensor device) on some devices can
-      be part of GCC and hence the TSENS properties can also be part
-      of the GCC/clock-controller node.
-      For more details on the TSENS properties please refer
-      Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-
-  nvmem-cell-names:
-    minItems: 1
-    maxItems: 2
-    description:
-      Names for each nvmem-cells specified.
-    items:
-      - const: calib
-      - const: calib_backup
-
-  'thermal-sensor-cells':
-    const: 1
-
   protected-clocks:
     description:
-       Protected clock specifier list as per common clock binding
+      Protected clock specifier list as per common clock binding.
 
 required:
   - compatible
@@ -131,33 +56,6 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: qcom,gcc-apq8064
-
-then:
-  required:
-    - nvmem-cells
-    - nvmem-cell-names
-    - '#thermal-sensor-cells'
-
-else:
-  if:
-    properties:
-      compatible:
-        contains:
-          enum:
-            - qcom,gcc-msm8998
-            - qcom,gcc-sm8150
-            - qcom,gcc-sc7180
-  then:
-    required:
-       - clocks
-       - clock-names
-
-
 examples:
   # Example for GCC for MSM8960:
   - |
@@ -168,78 +66,4 @@ examples:
       #reset-cells = <1>;
       #power-domain-cells = <1>;
     };
-
-
-  # Example of GCC with TSENS properties:
-  - |
-    clock-controller@900000 {
-      compatible = "qcom,gcc-apq8064";
-      reg = <0x00900000 0x4000>;
-      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-      nvmem-cell-names = "calib", "calib_backup";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-      #thermal-sensor-cells = <1>;
-    };
-
-  # Example of GCC with protected-clocks properties:
-  - |
-    clock-controller@100000 {
-      compatible = "qcom,gcc-sdm845";
-      reg = <0x100000 0x1f0000>;
-      protected-clocks = <187>, <188>, <189>, <190>, <191>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-
-  # Example of GCC with clock node properties for SM8150:
-  - |
-    clock-controller@100000 {
-      compatible = "qcom,gcc-sm8150";
-      reg = <0x00100000 0x1f0000>;
-      clocks = <&rpmhcc 0>, <&rpmhcc 1>, <&sleep_clk>;
-      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-     };
-
-  # Example of GCC with clock nodes properties for SC7180:
-  - |
-    clock-controller@100000 {
-      compatible = "qcom,gcc-sc7180";
-      reg = <0x100000 0x1f0000>;
-      clocks = <&rpmhcc 0>, <&rpmhcc 1>, <0>;
-      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-
-  # Example of MSM8998 GCC:
-  - |
-    #include <dt-bindings/clock/qcom,rpmcc.h>
-    clock-controller@100000 {
-      compatible = "qcom,gcc-msm8998";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-      reg = <0x00100000 0xb0000>;
-      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-               <&sleep>,
-               <0>,
-               <0>,
-               <0>,
-               <0>,
-               <0>;
-      clock-names = "xo",
-                    "sleep_clk",
-                    "usb3_pipe",
-                    "ufs_rx_symbol0",
-                    "ufs_rx_symbol1",
-                    "ufs_tx_symbol0",
-                    "pcie0_pipe";
-    };
 ...
-- 
2.25.0.341.g760bfbb309-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux