Re: [PATCH v4 3/3] drm/tinydrm: add support for tft displays based on ilitek,ili9486

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kamlesh

On Mon, Jan 27, 2020 at 07:56:46PM +0530, Kamlesh Gurudasani wrote:
> This adds support fot ilitek,ili9486 based displays with shift register
> in front of controller.
> Ozzmaker,Piscreen and Waveshare,rpi-lcd-35 are such displays.
> 
> Signed-off-by: Kamlesh Gurudasani <kamlesh.gurudasani@xxxxxxxxx>

Driver looks good.

Can you please replace tinydrm with tiny in the subject.
We no longer have a tinydrm folder.

With this fixed:
Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>

> ---
> 
> v2 changes:
> * assignment of dbi_command before registration
> * made dc and reset gpio compulsory
> * typos and unwanted comments removed
> * changed the name of function which were display specific
> * arranged the Makefile entries in alphabetical order
> 
> v3 changes:
> * no changes
> 
> v4 changes:
> * no changes
> ---
>  MAINTAINERS                    |   7 +
>  drivers/gpu/drm/tiny/Kconfig   |  14 ++
>  drivers/gpu/drm/tiny/Makefile  |   1 +
>  drivers/gpu/drm/tiny/ili9486.c | 283 +++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 305 insertions(+)
>  create mode 100644 drivers/gpu/drm/tiny/ili9486.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 16423f5..30dd396 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5233,6 +5233,13 @@ S:	Maintained
>  F:	drivers/gpu/drm/tiny/ili9225.c
>  F:	Documentation/devicetree/bindings/display/ilitek,ili9225.txt
>  
> +DRM DRIVER FOR ILITEK ILI9486 PANELS
> +M:	Kamlesh Gurudasani <kamlesh.gurudasani@xxxxxxxxx>
> +T:	git git://anongit.freedesktop.org/drm/drm-misc
> +S:	Maintained
> +F:	drivers/gpu/drm/tiny/ili9486.c
> +F:	Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
> +
>  DRM DRIVER FOR HX8357D PANELS
>  M:	Eric Anholt <eric@xxxxxxxxxx>
>  T:	git git://anongit.freedesktop.org/drm/drm-misc
> diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
> index a866421..4160e74 100644
> --- a/drivers/gpu/drm/tiny/Kconfig
> +++ b/drivers/gpu/drm/tiny/Kconfig
> @@ -47,6 +47,20 @@ config TINYDRM_ILI9341
>  
>  	  If M is selected the module will be called ili9341.
>  
> +config TINYDRM_ILI9486
> +	tristate "DRM support for ILI9486 display panels"
> +	depends on DRM && SPI
> +	select DRM_KMS_HELPER
> +	select DRM_KMS_CMA_HELPER
> +	select DRM_MIPI_DBI
> +	select BACKLIGHT_CLASS_DEVICE
> +	help
> +	  DRM driver for the following Ilitek ILI9486 panels:
> +	  * PISCREEN 3.5" 320x480 TFT (Ozzmaker 3.5")
> +	  * RPILCD 3.5" 320x480 TFT (Waveshare 3.5")
> +
> +	  If M is selected the module will be called ili9486.
> +
>  config TINYDRM_MI0283QT
>  	tristate "DRM support for MI0283QT"
>  	depends on DRM && SPI
> diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
> index 896cf31..c96ceee 100644
> --- a/drivers/gpu/drm/tiny/Makefile
> +++ b/drivers/gpu/drm/tiny/Makefile
> @@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_GM12U320)		+= gm12u320.o
>  obj-$(CONFIG_TINYDRM_HX8357D)		+= hx8357d.o
>  obj-$(CONFIG_TINYDRM_ILI9225)		+= ili9225.o
>  obj-$(CONFIG_TINYDRM_ILI9341)		+= ili9341.o
> +obj-$(CONFIG_TINYDRM_ILI9486)		+= ili9486.o
>  obj-$(CONFIG_TINYDRM_MI0283QT)		+= mi0283qt.o
>  obj-$(CONFIG_TINYDRM_REPAPER)		+= repaper.o
>  obj-$(CONFIG_TINYDRM_ST7586)		+= st7586.o
> diff --git a/drivers/gpu/drm/tiny/ili9486.c b/drivers/gpu/drm/tiny/ili9486.c
> new file mode 100644
> index 0000000..e960b16
> --- /dev/null
> +++ b/drivers/gpu/drm/tiny/ili9486.c
> @@ -0,0 +1,283 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * DRM driver for Ilitek ILI9486 panels
> + *
> + * Copyright 2020 Kamlesh Gurudasani <kamlesh.gurudasani@xxxxxxxxx>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/spi/spi.h>
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_mipi_dbi.h>
> +#include <drm/drm_modeset_helper.h>
> +
> +#define ILI9486_ITFCTR1         0xb0
> +#define ILI9486_PWCTRL1         0xc2
> +#define ILI9486_VMCTRL1         0xc5
> +#define ILI9486_PGAMCTRL        0xe0
> +#define ILI9486_NGAMCTRL        0xe1
> +#define ILI9486_DGAMCTRL        0xe2
> +#define ILI9486_MADCTL_BGR      BIT(3)
> +#define ILI9486_MADCTL_MV       BIT(5)
> +#define ILI9486_MADCTL_MX       BIT(6)
> +#define ILI9486_MADCTL_MY       BIT(7)
> +
> +/*
> + * The PiScreen/waveshare rpi-lcd-35 has a SPI to 16-bit parallel bus converter
> + * in front of the  display controller. This means that 8-bit values have to be
> + * transferred as 16-bit.
> + */
> +static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par, size_t num)
> +{
> +	struct spi_device *spi = mipi->spi;
> +	void *data = par;
> +	u32 speed_hz;
> +	int i, ret;
> +	u16 *buf;
> +
> +	buf = kmalloc(32 * sizeof(u16), GFP_KERNEL);
> +	if (!buf)
> +		return -ENOMEM;
> +
> +	/*
> +	 * The displays are Raspberry Pi HATs and connected to the 8-bit only
> +	 * SPI controller, so 16-bit command and parameters need byte swapping
> +	 * before being transferred as 8-bit on the big endian SPI bus.
> +	 * Pixel data bytes have already been swapped before this function is
> +	 * called.
> +	 */
> +	buf[0] = cpu_to_be16(*cmd);
> +	gpiod_set_value_cansleep(mipi->dc, 0);
> +	speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 2);
> +	ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, buf, 2);
> +	if (ret || !num)
> +		goto free;
> +
> +	/* 8-bit configuration data, not 16-bit pixel data */
> +	if (num <= 32) {
> +		for (i = 0; i < num; i++)
> +			buf[i] = cpu_to_be16(par[i]);
> +		num *= 2;
> +		speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
> +		data = buf;
> +	}
> +
> +	gpiod_set_value_cansleep(mipi->dc, 1);
> +	ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, data, num);
> + free:
> +	kfree(buf);
> +
> +	return ret;
> +}
> +
> +static void waveshare_enable(struct drm_simple_display_pipe *pipe,
> +			   struct drm_crtc_state *crtc_state,
> +			   struct drm_plane_state *plane_state)
> +{
> +	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
> +	struct mipi_dbi *dbi = &dbidev->dbi;
> +	u8 addr_mode;
> +	int ret, idx;
> +
> +	if (!drm_dev_enter(pipe->crtc.dev, &idx))
> +		return;
> +
> +	DRM_DEBUG_KMS("\n");
> +
> +	ret = mipi_dbi_poweron_conditional_reset(dbidev);
> +	if (ret < 0)
> +		goto out_exit;
> +	if (ret == 1)
> +		goto out_enable;
> +
> +	mipi_dbi_command(dbi, ILI9486_ITFCTR1);
> +	mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
> +	msleep(250);
> +
> +	mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
> +
> +	mipi_dbi_command(dbi, ILI9486_PWCTRL1, 0x44);
> +
> +	mipi_dbi_command(dbi, ILI9486_VMCTRL1, 0x00, 0x00, 0x00, 0x00);
> +
> +	mipi_dbi_command(dbi, ILI9486_PGAMCTRL,
> +			 0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98,
> +			 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x0);
> +	mipi_dbi_command(dbi, ILI9486_NGAMCTRL,
> +			 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
> +			 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00);
> +	mipi_dbi_command(dbi, ILI9486_DGAMCTRL,
> +			 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
> +			 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00);
> +
> +	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
> +	msleep(100);
> +
> + out_enable:
> +	switch (dbidev->rotation) {
> +	case 90:
> +		addr_mode = ILI9486_MADCTL_MY;
> +		break;
> +	case 180:
> +		addr_mode = ILI9486_MADCTL_MV;
> +		break;
> +	case 270:
> +		addr_mode = ILI9486_MADCTL_MX;
> +		break;
> +	default:
> +		addr_mode = ILI9486_MADCTL_MV | ILI9486_MADCTL_MY |
> +			ILI9486_MADCTL_MX;
> +		break;
> +	}
> +	addr_mode |= ILI9486_MADCTL_BGR;
> +	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
> +	mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
> + out_exit:
> +	drm_dev_exit(idx);
> +}
> +
> +static const struct drm_simple_display_pipe_funcs waveshare_pipe_funcs = {
> +	.enable = waveshare_enable,
> +	.disable = mipi_dbi_pipe_disable,
> +	.update = mipi_dbi_pipe_update,
> +	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
> +};
> +
> +static const struct drm_display_mode waveshare_mode = {
> +	DRM_SIMPLE_MODE(480, 320, 73, 49),
> +};
> +
> +DEFINE_DRM_GEM_CMA_FOPS(ili9486_fops);
> +
> +static struct drm_driver ili9486_driver = {
> +	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
> +	.fops			= &ili9486_fops,
> +	.release		= mipi_dbi_release,
> +	DRM_GEM_CMA_VMAP_DRIVER_OPS,
> +	.debugfs_init		= mipi_dbi_debugfs_init,
> +	.name			= "ili9486",
> +	.desc			= "Ilitek ILI9486",
> +	.date			= "20200118",
> +	.major			= 1,
> +	.minor			= 0,
> +};
> +
> +static const struct of_device_id ili9486_of_match[] = {
> +	{ .compatible = "waveshare,rpi-lcd-35" },
> +	{ .compatible = "ozzmaker,piscreen" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, ili9486_of_match);
> +
> +static const struct spi_device_id ili9486_id[] = {
> +	{ "ili9486", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(spi, ili9486_id);
> +
> +static int ili9486_probe(struct spi_device *spi)
> +{
> +	struct device *dev = &spi->dev;
> +	struct mipi_dbi_dev *dbidev;
> +	struct drm_device *drm;
> +	struct mipi_dbi *dbi;
> +	struct gpio_desc *dc;
> +	u32 rotation = 0;
> +	int ret;
> +
> +	dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
> +	if (!dbidev)
> +		return -ENOMEM;
> +
> +	dbi = &dbidev->dbi;
> +	drm = &dbidev->drm;
> +	ret = devm_drm_dev_init(dev, drm, &ili9486_driver);
> +	if (ret) {
> +		kfree(dbidev);
> +		return ret;
> +	}
> +
> +	drm_mode_config_init(drm);
> +
> +	dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(dbi->reset)) {
> +		DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
> +		return PTR_ERR(dbi->reset);
> +	}
> +
> +	dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW);
> +	if (IS_ERR(dc)) {
> +		DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");
> +		return PTR_ERR(dc);
> +	}
> +
> +	dbidev->backlight = devm_of_find_backlight(dev);
> +	if (IS_ERR(dbidev->backlight))
> +		return PTR_ERR(dbidev->backlight);
> +
> +	device_property_read_u32(dev, "rotation", &rotation);
> +
> +	ret = mipi_dbi_spi_init(spi, dbi, dc);
> +	if (ret)
> +		return ret;
> +
> +	dbi->command = waveshare_command;
> +	dbi->read_commands = NULL;
> +
> +	ret = mipi_dbi_dev_init(dbidev, &waveshare_pipe_funcs, &waveshare_mode, rotation);
> +	if (ret)
> +		return ret;
> +
> +	drm_mode_config_reset(drm);
> +
> +	ret = drm_dev_register(drm, 0);
> +	if (ret)
> +		return ret;
> +
> +	spi_set_drvdata(spi, drm);
> +
> +	drm_fbdev_generic_setup(drm, 0);
> +
> +	return 0;
> +}
> +
> +static int ili9486_remove(struct spi_device *spi)
> +{
> +	struct drm_device *drm = spi_get_drvdata(spi);
> +
> +	drm_dev_unplug(drm);
> +	drm_atomic_helper_shutdown(drm);
> +
> +	return 0;
> +}
> +
> +static void ili9486_shutdown(struct spi_device *spi)
> +{
> +	drm_atomic_helper_shutdown(spi_get_drvdata(spi));
> +}
> +
> +static struct spi_driver ili9486_spi_driver = {
> +	.driver = {
> +		.name = "ili9486",
> +		.of_match_table = ili9486_of_match,
> +	},
> +	.id_table = ili9486_id,
> +	.probe = ili9486_probe,
> +	.remove = ili9486_remove,
> +	.shutdown = ili9486_shutdown,
> +};
> +module_spi_driver(ili9486_spi_driver);
> +
> +MODULE_DESCRIPTION("Ilitek ILI9486 DRM driver");
> +MODULE_AUTHOR("Kamlesh Gurudasani <kamlesh.gurudasani@xxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> -- 
> 2.7.4



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux