[PATCH 1/2] dt-bindings: display/panel: add bindings for S6E88A0-AMS452EF01

[michael.srba@xxxxxxxxx]

From: Michael Srba <Michael.Srba@xxxxxxxxx>

This patch adds dts bindings for Samsung AMS452EF01 AMOLED panel, which makes
use of their S6E88A0 controller.

Signed-off-by: Michael Srba <Michael.Srba@xxxxxxxxx>
---
 .../panel/samsung,s6e88a0-ams452ef01.txt      | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.txt

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.txt
new file mode 100644
index 000000000000..2dcf9580febd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.txt
@@ -0,0 +1,26 @@
+Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode controller.
+
+Required properties:
+  - compatible: "samsung,s6e88a0-ams452ef01"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: core voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [1]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	panel@0 {
+		reg = <0>;
+
+		compatible = "samsung,s6e88a0-ams452ef01";
+
+		vdd3-supply = <&pm8916_l17>;
+		vci-supply = <&reg_vlcd_vci>;
+		reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+	};
-- 
2.24.0