With support for the MSM8996 UFS PHY added to the common QMP driver, migrate the DTS to use the common QMP binding. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- Depends on https://lore.kernel.org/linux-arm-msm/20200125000803.435264-1-bjorn.andersson@xxxxxxxxxx/ Changes since v2: - Rebased patch arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 6 ----- arch/arm64/boot/dts/qcom/msm8996.dtsi | 25 +++++++++++++------- 2 files changed, 17 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index fff6115f2670..af87350b5547 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -999,13 +999,7 @@ &ufsphy { vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &ufshc { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 30cdbbe43d6c..a599761228a7 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -885,7 +885,7 @@ ufshc: ufshc@624000 { reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy>; + phys = <&ufsphy_lane>; phy-names = "ufsphy"; power-domains = <&gcc UFS_GDSC>; @@ -937,16 +937,25 @@ ufs_variant { }; ufsphy: phy@627000 { - compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; - reg = <0x00627000 0xda8>; - reg-names = "phy_mem"; - #phy-cells = <0>; + compatible = "qcom,msm8996-qmp-ufs-phy"; + reg = <0x00627000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref"; - clock-names = "ref_clk_src", "ref_clk"; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_UFS_CLKREF_CLK>; resets = <&ufshc 0>; + reset-names = "ufsphy"; status = "disabled"; + + ufsphy_lane: lanes@627400 { + reg = <0x627400 0x12c>, + <0x627600 0x200>, + <0x627c00 0x1b4>; + #phy-cells = <0>; + }; }; camss: camss@a00000 { -- 2.24.0
